• Sonuç bulunamadı

BMT202 MESLEKİ YABANCI DİL 2 14.HAFTA

N/A
N/A
Protected

Academic year: 2021

Share "BMT202 MESLEKİ YABANCI DİL 2 14.HAFTA"

Copied!
7
0
0

Yükleniyor.... (view fulltext now)

Tam metin

(1)

BMT202 MESLEKİ

YABANCI DİL 2

14.HAFTA

GAMA MESLEK YÜKSEKOKULU

ÖĞR.GÖR.MEHMET DURSUN

(2)

System Overview - A3

………

The A3 is a full function monitor for use on adult and pediatric patients.

………

The functions performed by the system include monitoring patient ECG, heart rate, respiration

……….……

rate, blood pressures, blood oxygen saturation, and temperature.

………

(3)

………

instrument performs various microprocessor-programmed analytical functions, such as:

………

Creating both visual and audible alarm signals when set limits are violated Creating and

………

displaying warning messages when conditions are detected that would degrade or prevent

………

valid measurements Creating and displaying trend waveforms or tabular data;

(4)

Providing a synchronizing pulse for defibrillator operation;

………

Providing input to an optional recorder for printout of current or trend waveforms or tabular data.

………

The monitor is essentially a battery-powered instrument.

(5)

An internal charging unit is designed to accept either an AC line voltage or DC source input voltage.

………

The charger uses these external power sources to maintain a float voltage source available

………fr om the batteries.

(6)

Block Diagram - A3

………

The A3 functions are represented graphically in the System Block Diagram, Figure 2.

………

Each section of the System Block Diagram is described briefly in the text that follows the illustration.

………

This is followed by more detailed descriptions of the theory of operation of each block.

(7)

Kaynakça:

Philips A1 and A3 Patient Monitors- Service Guide Service Guide.

Philips Medical Systems

Referanslar

Benzer Belgeler

It ensures safe processes by means of the locking system which does not allow the

This key is used to set the speed and time during programming and to check the RCF value during the operation..

Connect the centrifuge to a correctly grounded power

• At the end of the adjusted time the motor stats to slow down and ‘br’ is seen on the speed

In case of a power cut or any defects, the instrument would be opened manually to be able to get the

Battery If the monitor has not been used for a long period of time, the battery will need.. Note Storing the monitor for a long period without charging the battery can

This section discusses the tests used to verify performance following repairs or during

during repair the complete set of NiBP performance tests described in this service