• Sonuç bulunamadı

ENE 503 – Computational Fluid Dynamics WEEK 8: COMPRESSIBLE MODELLING CONTINUES COMPRESSIBLE MODELLING (Continues):

N/A
N/A
Protected

Academic year: 2021

Share "ENE 503 – Computational Fluid Dynamics WEEK 8: COMPRESSIBLE MODELLING CONTINUES COMPRESSIBLE MODELLING (Continues):"

Copied!
6
0
0

Yükleniyor.... (view fulltext now)

Tam metin

(1)

ENE 503 – Computational Fluid Dynamics

WEEK 8: COMPRESSIBLE MODELLING CONTINUES

COMPRESSIBLE MODELLING (Continues):

 Contents:

- The turbulent flow past a transonic airfoil at a nonzero angle of attack is modelled and simulated by using the Spalart-Allmaras turbulence model.

- The simulations are conducted by using the same boundary conditions specified in the Tutorial. The same mesh configuration is also employed.

- Parametric study is conducted at different Mach numbers and viscosity ratios as below:

Simulation 1. Mach Number: 0.8; Turbulent Viscosity Ratio: 10 Simulation 2: Mach Number: 1.0; Turbulent Viscosity Ratio: 10 Simulation 3: Mach Number: 1.2; Turbulent Viscosity Ratio: 10 Simulation 4: Mach Number: 1.2; Turbulent Viscosity Ratio: 30

- Comparative studies for the above simulations are performed by reproducing the below indicated results:

1. Pressure Contours

2. Velocity Magnitude History

3. Drag Coefficient Convergence History 4. Lift Coefficient Convergence History 5. Moment Coefficient Convergence History 6. XY Plot of y+ Distribution

7. Contour Plot of Mach Number 8. XY Plot of Pressure

9. XY Plot of x Wall Shear Stress

10. Contour Plot of x Component of Velocity 11. Plot of Velocity Vectors

(2)

 Comparisons (continues): 6 – XY Plots y + distributions (a) (b) (c) (d)

Figure 6. XY y+ plots a) Simulation 1; b) Simulation 2; c) Simulation 3; d) Simulation 4

7 – Mach contours

(3)

(c) (d)

Figure 7. Mach number contours a) Simulation 1; b) Simulation 2; c) Simulation 3; d) Simulation 4

8 – XY Plots of pressure

(a) (b)

(c) (d)

Figure 8. XY Plots of pressure a) Simulation 1; b) Simulation 2; c) Simulation 3; d) Simulation 4

(4)

(a) (b)

(c) (d)

Figure 9. XY Plots of Xwall shear stress a) Simulation 1; b) Simulation 2; c) Simulation 3; d) Simulation 4

10 - Contour Plot of x Component of Velocity

(5)

(c) (d)

Figure 10. XY Plots of x component velocity a) Simulation 1; b) Simulation 2; c) Simulation 3; d) Simulation 4

11 – Velocity vector plots

(a) (b)

(6)

Figure 11. Velocity vectors a) Simulation 1; b) Simulation 2; c) Simulation 3; d) Simulation 4

References

1. Jameson A., Iterative solution of transonic flows over airfoils and wings, including flows at mach 1, Communications on Pure and Applied Mathematics, Volume 27, Issue 3, Pages 283–405, May 1974.

2. Melnik R.E., Chow R., Mead H.R., Theory of viscous transonic flow over airfoils at high Reynolds number, 10th Fluid and Plasmadynamics Conference,

Albuquerque,NM,U.S.A., 1977.

3. Harris C.D., “Two-Dimensional Aerodynamic Characteristics of the NACA 0012 Airfoil in the Langley 8-foot Transonic Pressure Tunnel,” NASA Ames Research Center, NASA TM 81927, 1981.

4. Coakley T.J., “Numerical Simulation of Viscous Transonic Airfoil Flows,” NASA Ames Research Center, AIAA-87-0416, 1987.

5. Hall K.C., Thomas J.P., Dowell E.H., Proper Orthogonal Decomposition

Technique for Transonic Unsteady Aerodynamic Flows, AIAA JOURNAL, Vol. 38, No. 10, October 2000.

Referanslar

Benzer Belgeler

2003 yılından başlayarak 7 sene boyunca çift uydudan elde edilen verilerin incelendiği araştırmada, bu kaybın yüzde 60' ının, yeraltı sularının pompayla

When the fundamental physical principals are applied to an infinitesimal fluid element, the governing partial differential equations of fluid dynamics are obtained. 

- The governing equations of fluid motion are represented ina series of partial differential equations which contain the raw flow variables. - The computer solve these

- Using finite volume method, the solution domain is subdivided into a finite number of small control volumes (cells) by a grid. -The grid defines the boundaries of the

- All types of vertical axis wind turbines (VAWTs) have the main rotor shaft arranged vertically.. - It can take advantage of any wind direction where wind shifts direction or

would be used in the outer volume as illustrated in 2-D mesh layouts of the present flow domain together with the 3-D local mesh representing the rotating inner zone and

 The less elongated separated shear layer in case of the RNG k-ε model leads to stronger and more discernible vortex patterns in the wake compared to those for the other

- This tutorial illustrates the setup and solution of a three-dimensional turbulent fluid flow and heat transfer problem in a mixing elbow, using both the serial and the