ABYYHY-1975, (1975). “Afet Bölgelerinde Yapılacak Yapılar Hakkında Yönetmelik”, Bayındırlık ve İskân Bakanlığı, Ankara.
ABYYHY-1998, (1998). “Afet Bölgelerinde Yapılacak Yapılar Hakkında Yönetmelik”, Bayındırlık ve İskân Bakanlığı, Ankara. 86 s.
ABYBHY Taslak, (2005). “Afet Bölgelerinde Yapılacak Binalar Hakkında Yönetmelik Taslak-1”, Bayındırlık ve İskân Bakanlığı, Ankara. 86 s.
Adalier, K. and Aydingun, O. (2001). Structural Engineering Aspects of the June 27, 1998 Adana-Ceyhan (Turkey) Earthquake, Engineering Structures, (23):343–355.
Anonim, (2001). Stifness of R/C Members. Lecture Notes, Purdue University, West Lafayette, IN, USA. 221 s.
ATC-32, (1996). Improved Seismic Design Criteria for California Bridges: Provisional Recommendations, Applied Technology Council, California.
ATC-40, (1996). Seismic Evaluation and Retrofit of Concrete Buildings, Applied Technology Council, Redwood City, California.
Bae, S. (2005). “Seismic Performance of Full-Scale Reinforced Concrete Columns”, Ph.D. Dissertation, The University of Texas at Austin, 306 sayfa
Bağcı, G., Yatman, A., Özdemir, S. and Altın, N., (2003). Destructive earthquakes in Turkey. hhttp://www.deprem. gov.tr/reports.html
Baker, A.L.L. (1956). “Ultimate Load Theory Applied to the Design of Reinforced and Prestressed Concrete Frames,” Concrete Publications Ltd., London
Baker, A.L.L. and Amarakone, A.M.N. (1964) “Inelastic Hyperstatic Frame Analysis,” Proceedings International Symposium on the Flexural Mechanics of Reinforced Concrete, ACI SP-12, Miami, pp. 85-142.
Bayülke N., Kocaman C., Köksal T. S., ve Kuran F., (2004). 1 Mayıs Bingöl Depreminde Yapısal Hasar, Afet İşleri Genel Müdürlüğü Deprem Araştırma Dairesi Deprem Mühendisliği Şubesi.
Bilgin, H., Baytan. H. B., (2006). Kamu Yapılarında Beton Dayanımı ve Enine Donatının Performansa Etkisi, Yedinci Uluslar arası İnşaat mühendisliğinde Gelişmeler Kongresi, 11-13 Ekim, İstanbul, Bildiri No: ace06-286.
Bilgin, H., İnel, M., Özmen, H. B., (2006). Kamu Yapılarının Deprem Kapasitelerinin Değerlendirilmesi, Yapısal Onarım ve Güçlendirme Sempozyumu Bildiriler Kitabı, Pamukkale, Denizli, s. 237-246.
Celep, Z. ve Kumbasar, N. (2000). “Depreme Dayanıklı Yapı Tasarımı” Sema Matbaacılık, 596 sayfa, İstanbul.
Chopra, A. K. (1981). “Dynamics of Structures, A Primer”, Monograph Series, Eartquake Engineering Research Institute, Berkeley, CA.
Chopra, A. K., (2000). Dynamics of Structures: Theory and Applications to Earthquake Engineering (2nd Edition), Pearson Education, ISBN: 0130869732, 844 pages.
Cagatay, İ. H., (2005). “Experimental evaluation of buildings damaged in recent earthquakes in Turkey”, Engineering Failure Analysis, 12; 440-452.
Clough, R.W. and Penzien J., (1993). Dynamics of Structures, New York. Mc Graw- Hill, 669 pp.
Corley, W.G., (1966). “Rotational Capacity of Reinforced Concrete Beams,” Journal of the Structural Division, ASCE, Vol(92), No. ST5, Oct., pp. 121-146
CSI, (2005). CSI Analysis Reference Manual for SAP2000, ETABS and SAFE, Computers and Structures Inc, California, USA. 415 s.
DBYBHY-2007, (2007) Deprem Bölgelerinde Yapılacak Yapılar Hakkında Yönetmelik, Bayındırlık ve İskân Bakanlığı, Ankara. 159 s.
Dogangun, A,. (2004), Performance Of Reinforced Concrete Buildings During The May 1 2003 Bingöl Earthquake In Turkey, Engineering Structures, (26):841-856.
EERI Special Earthquake Report, (2003). Preliminary observation on the May 1, 2003 Bingol, Turkey earthquake, EERI, July 2003.
Erdik, M. (2001). Report on 1999 Kocaeli and Düzce (Turkey) Earthquakes,in Structural Control for Civil and Infrastructure Engineering, Ed. by, F. Casciati, G. Magonette, World Scientific.
FEMA 154, (1988). Rapid Visual Screening of Buildings for Potential Seismic Hazards: A Handbook, ATC-21, Federal Emergency Management Agency, Washington.
FEMA 273-274, (1997). NEHRP Guidelines for the Seismic Rehabilitation of Buildings. Developed by the Building Seismic Safety Council for the Federal Emergency Management Agenc,y Washington, DC, U.S.A.
FEMA 307, (1998). Evaluation Of Earthquake Damaged Concrete and Masonry Wall Buildings, Federal Emergency Management Agency, Washington.
FEMA 310, (1998). Handbook for the Seismic Evaluation of Buildings—A Prestandard, prepared by the American Society of Civil Engineers for the Federal Emergency Management Agency, Washington, D.C.
FEMA 356-357, (2000). Prestandard and Commentary for the Seismic Rehabilitation of Buildings. Federal Emergency Management Agency. Washington DC, USA.
FEMA 440, (2005). Improvement of Nonlinear Static Seismic Analysis Procedures, prepared by ATC for American Society of Civil Engineers for the Federal Emergency, Washington, D.C,.
Ghobarah, A., (2001). Performance –based design in earthquake engineering: state of development. Engineering Structures, (23):878-884.
Gülkan, P., Akar, S. and Yazgan, U., (2003). A Preliminary Engineering Report on the Bingöl l Earthquake of May 1, 2003, http://www.eeri.org/bingol_turkey/ Bingol_
Earthquake 01_05_03.pdf.
Hassan, A.F. and Sozen, M.A., (1997). Seismic Vulnerability Assessment Of Lowrise Buildings In Regions With Infrequent Earthquakes, ACI Structural Journal; 94(1):31–39.
HAZUS, (1999). Earthquake Loss Estimation Methodology Technical Manual, National Institute of Building Sciences for Federal Emergency Management Agency (FEMA)
Inel M, Bretz E, Black E, Aschheim M, Abrams D., (2001). USEE 2001-utility software for earthquake engineering: program, report, and user’s manual. CD Release 01-05. University of Illinois (Urbana): Mid-America Earthquake Center. Available for download from http://mae.ce.uiuc.edu/.
İnan, E., Güler, H.,ve Çoruh, E. (1993) “Bölüm-VII Kuvvetli Yer Hareketi Kayıtları" 13 Mart 1992 Erzincan Depremi Raporu, Editör, N. Bayülke, Bayındırlık ve İskan Bakanlığı, Afet İşleri Genel Müdürlüğü, Deprem Araştırma Dairesi, Ankara. İnel, M., Senel, S.M., Toprak, S., Kayhan, A.H. and Yilmaz, S. (2004) Building
Damage Assesment of Urban Areas: A Case Study for Denizli, Turkey, 6th International Congress on Advances in Civil Engineering, Istanbul, Turkey. İzmir Deprem Senaryosu, (2000). www.koeri boun.edu.tr.
Kaplan H., Yilmaz S, Binici H., Yazar E. and Cetinkaya N., (2004). “May 1, 2003 Turkey –Bingol earthquake: Damage in reinforced concrete structures”, Engineering Failure Analysis, 11; 279-291.
Kaplan ve diğ. (2003-2007). Aydın, Denizli ve Muğla illerinde bulunan bazı kamu binalarına ait Depremsellik İnceleme Raporları, Pamukkale Üniversitesi İnşaat Mühendisliği Bölümü, Denizli.
KOERI, (2003). May 1 2003 Bingöl (Turkey) Earthquake preliminary report. http://www.koeri.boun.edu.tr/depremmuh/bingol_eq.html.
Krawinkler, H. and Seneviratna, G. D. P. K., (1998). Pros and Cons of a Pushover Analysis of Seismic Performance Evaluation, Engineering Structures, 20: 452-464.
Lawson RS, Vance V, Krawinkler H. (1994) Nonlinear static push-over analysis-why, when, and how? In: Proceedings 5th US NCEE, IL, Chicago, USA, 1: 283-292.
Mander, J.B., Priestley, M.J.N. and Park, R., (1988). Theoretical Stress-Strain Model for Confined Concrete, ASCE Journal of Structural Engineering, 114:1804-1826.
Mattock, A.H., (1964) “Rotational Capacity of Hinging Regions in Reinforced Concrete Beams,” Proceedings International Symposium on the Flexural Mechanics of Reinforced Concrete, ACI SP-12, Miami, pp. 143-181.
Mattock, A.H., (1967). Discussion of “Rotational Capacity of Hinging Regions in Reinforced Concrete Beams,” by Corley, W.G., Journal of the Structural Division, ASCE, No. ST2, Apr., 93: pp. 519-522.
Mendis, P., (2001). “Plastic Hinge Lengths of Normal and High-Strength Concrete in Flexure,” Advances in Structural Engineering, No. 4, Oct., 4: pp. 189-195.
Moehle, J. P., (1992). Displacement-Based Design of RC Structures Subjected to Earthquakes, Earthquake Spectra, 8(3): 403-428.
Moehle, J.P., (1996). Displacement-based seismic design criteria. In: Proceedings of 11th World Conference on Earthquake Engineering, Acapulco, Mexico. Paper No: 2125. Oxford: Pergamon.
Moehle, J. P., (2000). State of Research on Seismic Retrofit of Concrete Building Structures in the US, US-Japan Symposium and Workshop on Seismic Retrofit of Concrete Structures - State of Research and Practice, USA.
Newmark, N. M. and Rosenblueth, E., (1971). “Fundemantals of Eartquake Engineering”, Prentice-Hall, Inc., Englewood Cliffs, NJ.
Ozcebe, G., Ramirez, J., Wasti T.S., and Yakut A., (2004). 1 May 2003 Bingöl Earthquake Engineering Report, Publication No:2004/1.
Özcebe, G., (2004). Deprem Güvenliğinin Saptanması İçin Yöntemler Geliştirilmesi, TÜBİTAK İÇTAG YMAÜ İ574 Numaralı Araştırma Projesi Sonuç Raporu, Ankara.
Park, R. and Paulay, T. (1975). Reinforced Concrete Structures, New York. John Wiley & Sons; 769 pp.
Park, R., Kent, D. C. and Sampson, R. A. (1972), “Reinforced Concrete Member with Cyclic Loading,” J. Struct.Div., ASCE, Vol. 98, No. 7, pp. 1341-1360.
Park, R., Priestley, M.J.N. and Gill, W.D. (1982) “Ductility of Square-Confined Concrete Columns,” Journal of Structural Division, ASCE, 108, No. ST4, Apr., pp. 929-950
Paulay, T., and M. J. N. Priestley, (1992). Seismic Design of Reinforced Concrete and Masonary Buildings, John Willey & Sons, New York, NY, USA, 744p.
Priestley, M.J.N., Seible, F. and Calvi G.M.S. (1996) Seismic Design and Retrofit of Bridges, New York, John Wiley & Sons.
Priestley, M.J. (2000) Performance Based Seismic Design, Proc. 12 th World Conf. Earthquake Engineering.
Ray, W. Clough ve Joseph Penzien (1993), “Dynamics of Structers”, McGraw-Hill Book Co., New York, NY.
Scott, B.D., Park, R. and Priestley M.J.N. (1982) Stress-Strain Behavior of Concrete Confined by Overlapping Hoops at Low and High Strain Rates, ACI Structural Journal, 76: pp. 13-27.
Saatcioglu, M. and Razvi, S. (1992), “Strength and ductility of confinde concrete,” J. of Struct. Engrg., ASCE, 118(6), pp.1590-1607.
Saatcioglu M., Mitchell, D., Tinawi, R., Gardner, N. J., Gillies, A. G., Ghobarah, A., Anderson, D. L., and David Lau, D., (2001) The August 17, 1999, Kocaeli (Turkey) earthquake — damage to structures, Can. J. Civ. Eng.28: 715-737.
SEAOC (1995). Performance based seismic engineering of buildings. Vision 2000 Committee, Structural Engineers Association of California, Sacremento, CA. Sezen. H., Whittaker A.S., Elwood K.J. and Mosalam, K.M. (2003) Performance Of
Reinforced Concrete Buildings During The August 17 1999 Kocaeli, Turkey Earthquake, And Seismic Design and Construction Practice in Turkey, Engineering Structures, 25:103–114.
Sheikh, S. A. and Uzumeri, S. M., (1982), “Analytical model for concrete confinement in tied columns,” J.Struct. Div., ASCE, No. ST12, 108, 2703-2722.
Somerville, P.G., Smith, N.F., Graves, R.W. and Abrahamson, N.A., (1997). Modification of Empirical Strong Ground Motion Attenuation Relations to Include the Amplitude and Duration Effects of Rupture Directivity, Seismological Research Letters, Vol. 68, No. 1, 1997
Sucuoğlu H., (2000). The 1999 Kocaeli and Düzce-Turkey Earthquakes, www.metu.edu.tr/home/ wwweerc/guncel/koca-dzc.pdf
Tankut, T. (2003). Türkiye’deki Bina Yapıları için Güçlendirme Stratejisi.
Tedesco, J.W., McDougal, W. G. and Ross, C. A., (1998), Structural Dynamics : Theory and Applications, Pearson Education 1st edition, ISBN: 0673980529, 816 pages.
TS498, (1987). Yapı Elemanlarının Boyutlandırılmasında Alınacak Yüklerin Hesap Değerleri, TSE, Ankara.
TS500, (2000) Betonarme Yapıların Tasarım ve Yapım Kuralları, Türk Standartları Enstitüsü, Ankara.
Ülker, R. (1992) 13 Mart 1992 Erzincan depremi hakkında rapor, İTÜ Yapı ve Deprem Uygulama Araştırma Merkezi.
Ülker, R. (1995) 01 Ekim 1995 Dinar depremi hakkında rapor, İTÜ Yapı ve Deprem Uygulama Araştırma Merkezi.
Yakut, A. (2004) Preliminary Seismic Assessment Procedure for Existing RC Buildings, Engineering Structures, Vol(26): 1447-1461.
Yeh, Y. K., Chung, L. L., Chiou, T. C., and Chow, T. K., (2006), “Seismic performance of retrofitted school buildings”, First European Conference on Earthquake Engineering and Seismology, Geneva, Switzerland, 3-8 September (Paper No.167)
EK-1 10370 tip nolu okul projesi kolon-perde yerleşim planı (Ölçüler mm.) (250X500) (500X400) (500X400) (600X400) (600X400) (300X500) (300X500) (300X500) (300X500) (300X500) (300X500) (300X500) (300X500) (300X500) (250/5000) (250/5000) (7000/250) (7000/250) 6 5 4 3 2 1 G F E D C B A 3600 3650 3700 46 80 26 70 2450 2400 2500 1470 0 21900 3660 3690 3600