Agarwal G, Patnaik O, Sharma RK (2013). Thermo-mechanical properties of silicon carbide-filled chopped glass fiber-reinforced epoxy composites. International Journal of Advanced Structural Engineering.
Agbeleye AA, Esezobor DE, Agunsoye JO, Balogun SA, Sosimi AA (2018). Prediction of the abrasive wear behaviour of heat-treated aluminium-clay composites using an artificial neural network, Journal of Taibah University for Science, 12: 235-240.
Al-Mahasneh AJ, Anavatti SG, Garratt MA (2018). Review of Applications of Generalized Regression Neural Networks in Identification and Control of Dynamic Systems. School of Engineering and Information Technology.
Anderson, M, Whitcomb, P (2000). DOE Simplified. Productivity Inc.
https://www.statease.com/media/productattachments/files/e/d/edme7_one-factor_tut.
pdf erişim tarihi 11.12.2018)
Anonim (2018). R kare ve düzeltilmiş r kare. http://www.datascience.istanbul/2017/07/11/r-kare-ve-duzeltilmis-r-kare/ (erişim tarihi 28.3.2018).
Anonim (2018). Central Composite Designs. https://www.itl.nist.gov/div898/handbook/
pri/section3/pri3361.htm (erişim tarihi 1.4.2018).
Anonim (2018). Epoksi kullanım alanları. http://www.niseboya.com.tr/yazilar/epoksi-kullanim-alanlari/ (erişim tarihi 2.4.2018).
Anonim (2018). Recurrent neural network tutorial. http://www.wildml.com/2015/09/recurrent-neural-networks-tutorial-part-1-introduction-to-rnns/ (erişim tarihi 22.10.2018).
Anonim (2018). Artificial Neural Networks http://osp.mans.edu.eg/rehan/ann/Artificial%20 Neural%20Networks.htm (erişim tarihi 04.10.2018).
Anonim (2018). Coefficient of determination. https://www.statisticshowto.datasciencecentral .com/probability-and-statistics/coefficient-of-determination-r-squared/ (erişim tarihi 11.12.2018).
Anonim (2019). Ferrokrom. http://www.altinkumdokum.com/tr/urun/Ferrokrom (erişim tarihi 23.3.2019).
Baldi P (1995). Gradient descent learning algorithm overview: A general dynamical systems perspective. IEEE Transactions on Neural Networks, 6: 182-195.
Basavarajappa S, Yadav SM, Kumar S, Arun KV, Narendranath, S (2011). Abrasive Wear Behavior of Granite-Filled Glass-Epoxy Composites by SiC Particles Using Statistical Analysis. Polymer-Plastics Technology and Engineering, 50: 516-524.
Bagci M, Imrek H (2013). Application of Taguchi method on optimization of testing parameters for erosion of glass fiber reinforced epoxy composite materials. Materials & Design, 46:
706-712.
Bezerra E, Ancelotti A, Pardini L, Rocco J, Iha, K, Ribeiro C (2007). Artificial neural networks applied to epoxy composites reinforced with carbon and E-glass fibers: Analysis of the shear mechanical properties. Materials Science and Engineering: A, 464: 177-185.
93
Bezerra MA, Santelli RE, Oliveira EP, Villar LS, Escaleira LA (2008). Response surface methodology (RSM) as a tool for optimization in analytical chemistry. Talanta, 76: 965-977.
Bishop CM (1995). Neural Networks for Pattern Recognition. Oxford University Press, Oxford.
Biswas S, Satapathy A (2010). A Study on Tribological Behavior of Alumina-Filled Glass–
Epoxy Composites Using Taguchi Experimental Design. Tribology Transactions, 53:
520-532.
Blanca M, Alarcon R, Arnau J, Bono R, Bendayan R (2017). Non-normal data: Is ANOVA still a valid option? Psicothema, 29: 552-557.
Bonner WH (1962). Aromatic polyketones and preparation thereof. U.S. Patent Specification.
Briscoe B, Pogosian A, Tabor D (1974). The friction and wear of high density polythene: The action of lead oxide and copper oxide fillers. Wear, 27: 19-34.
Burnham KP, Anderson DR (2004). Multimodel Inference. Sociological Methods & Research, 33: 261-304.
Carley KM, Kamneva NY, Reminga J (2004). Response Surface Methodology.
Chandra Rao CH, Madhusudan S, Raghavendra G, Venkateswara Rao E (2012). Investigation in to Wear behavior of coir Fiber Reinforced Epoxy Composites with the Taguchi Method. International Journal of Engineering Research and Applications, 2: 371-374.
Diler EA, Ipek R (2013). Main and interaction effects of matrix particle size, reinforcement particle size and volume fraction on wear characteristics of Al–SiCp composites using central composite design. Composites Part B: Engineering, 50: 371-380.
Dorraji MS, Rasoulifard M, Amani-Ghadim A, Khodabandeloo M, Felekari M, Khoshrou M, Hajimiri I (2016). Microwave absorption properties of polypyrrole-SrFe12O19-TiO2 -epoxy resin nanocomposites: Optimization using response surface methodology. Applied Surface Science, 383: 9-18.
Drew PJ, Monson JRT (2000). Artificial neural networks. Surgery, 127: 3-11.
Er MJ, Wu S, Lu J, Toh HL (2002). Face recognition with radial basis function (RBF) neural networks. IEEE Transactions on Neural Networks, 13: 697-710.
Feir-Walsh BJ, Toothaker LE (1974). An Empirical Comparison of the Anova F-Test, Normal Scores Test and Kruskal-Wallis Test Under Violation of Assumptions. Educational and Psychological Measurement, 34: 789-799.
Franke GR (2010). Multicollinearity. Wiley International Encyclopedia of Marketing.
Ghasemi A, Zahediasl S (2012). Normality Tests for Statistical Analysis: A Guide for Non-Statisticians. Int J Endocrinol Metab, 10: 486-489.
Graupe D (2013). Principles of artificial neural networks. World Scientific Publ, Singapur.
Gyurova LA, Miniño-Justel P, Schlarb AK (2010). Modeling the sliding wear and friction properties of polyphenylene sulfide composites using artificial neural networks. Wear, 268: 708-714.
Haykin S (1998). Neural networks: A comprehensive foundation. Macmillan, New York.
94
Hyndman RJ, Koehler AB (2006). Another look at measures of forecast accuracy. International Journal of Forecasting, 22: 679-688.
Jain AK, Mao J (1996). Artificial neural networks: a tutorial. Computer, 29: 31-44.
Jang J, Sun C (1993). Functional equivalence between radial basis function networks and fuzzy inference systems. IEEE Transactions on Neural Networks, 4: 156-159.
Karlık B, Olgaç AV (2001). Performance Analysis of Various Activation Functions in Generalized MLP Architectures of Neural Networks. International Journal of Artificial Intelligence And Expert Systems, 1: 111-122.
Khuri AI, Mukhopadhyay S (2010). Response surface methodology. Wiley Interdisciplinary Reviews: Computational Statistics, 2: 128-149.
Kumar PS, Maniseka K, Narayanasamy R (2014). Experimental and Prediction of Abrasive Wear Behavior of Sintered Cu-SiC Composites Containing Graphite by Using Artificial Neural Networks. Tribology Transactions, 57: 455-471.
Lakshminarayanan A, Balasubramanian V (2008). Comparison of RSM with ANN in predicting tensile strength of friction stir welded AA7039 aluminium alloy joints. Transactions of Nonferrous Metals Society of China, 19: 9-18.
Levy KJ (1978). An empirical comparison of the ANOVAF-test with alternatives which are more robust against heterogeneity of variance. Journal of Statistical Computation and Simulation, 8: 49-57.
Marquis DM, Guillaume E, Chivas-Joly C (2011). Properties of Nanofillers in Polymer, Nanocomposites and Polymers with Analytical Methods, Dr. John Cuppoletti (Ed.), InTech, http://www.intechopen.com/books/nanocomposites-and-polymers-with-analyticalmethods/properties-of-nanofillers-in-polymer (Erişim tarihi 2018)
Masters T (1995). Advanced Algorithms for Neural Networks: A C++ Sourcebook. John Wiley
& Sons, New York.
Mirmohseni A, Zavareh S (2010). Modeling and optimization of a new impact-toughened epoxy nanocomposite using response surface methodology. Journal of Polymer Research, 18: 509-517.
Mohan N, Natarajan S, Kumareshbabu S (2011). Abrasive wear behaviour of hard powders filled glass fabric–epoxy hybrid composites. Materials & Design, 32: 1704-1709.
Montgomery DC (2001). Design and Analysis of Experiment. John Wiley and Sons Inc, 12-13, ABD.
Öztemel E (2012). Yapay sinir ağları. Papatya yayıncılık, İstanbul.
Padhi PK, Satapathy A (2014). Solid Particle Erosion Behavior of BFS-Filled Epoxy–SGF Composites Using Taguchis Experimental Design and ANN. Tribology Transactions, 57: 396-407.
Priddy KL, Keller PE (2005). Artificial neural networks: An introduction. SPIE Press, ABD.
Purohit A, Satapathy A (2017). Processing, characterization, and parametric analysis of erosion behavior of epoxy-LD sludge composites using Taguchi technique and response surface method. Polymer Composites, 39.
95
Quaiser T, Dittrich A, Schaper F, Mönnigmann M (2011). A simple work flow for biologically inspired model reduction - application to early JAK-STAT signaling. BMC Systems Biology, 5: 30.
Rajesh S, Rajakarunakaran S, Pandian RS (2012). Modeling And Optimization Of Sliding Specific Wear And Coefficient Of Friction Of Aluminum Based Red Mud Metal Matrıx Composıte Usıng Taguchı Method And Response Surface Methodology, Materials Physics and Mechanics, 150-166.
Ramesh B, Suresha B (2014). Optimization of tribological parameters in abrasive wear mode of carbon-epoxy hybrid composites. Materials & Design, 59: 38-49.
Rao SK, Varadarajan YS, Rajendra N (2014). Artificial neural network approach for the prediction of abrasive wear behaviour of carbon fabric reinforced epoxy composite. Indian Journal of Engineering and Material Science, 21: 16-22.
Rashmi, Renukappa NM, Suresha B, Devarajaiah R, Shivakumar K (2011). Dry sliding wear behaviour of organo-modified montmorillonite filled epoxy nanocomposites using Taguchi’s techniques. Materials & Design, 32: 4528-4536.
Rostamiyan Y, Mashhadzadeh AH, Salmankhani A (2014). Optimization of mechanical properties of epoxy-based hybrid nanocomposite: Effect of using nano silica and high-impact polystyrene by mixture design approach. Materials & Design (1980-2015), 56:
1068-1077.
Rostamiyan Y, Fereidoon A, Ghalebahman AG, Mashhadzadeh AH, Salmankhani A (2015a).
Experimental study and optimization of damping properties of epoxy-based nanocomposite: Effect of using nanosilica and high-impact polystyrene by mixture design approach. Materials & Design (1980-2015), 65: 1236-1244.
Rostamiyan Y, Fereidoon A, Rezaeiashtiyani M, Mashhadzadeh AH, Salmankhani A (2015b).
Experimental and optimizing flexural strength of epoxy-based nanocomposite: Effect of using nano silica and nano clay by using response surface design methodology. Materials & Design, 69: 96-104.
Rothon RN (1997). Mineral Fillers in Thermoplastics: Filler Manufacture. Journal of Adhesion, 64: 87–109.
Rout A, Satapathy A (2012). Analysis of Dry Sliding Wear Behaviour of Rice Husk Filled Epoxy Composites Using Design of Experiment and ANN. Procedia Engineering, 38:
1218-1232.
Satyanarayana G, Naidu GS, Babu NH (2018). Artificial neural network and regression modelling to study the effect of reinforcement and deformation on volumetric wear of red mud nano particle reinforced aluminium matrix composites synthesized by stir casting. Boletín De La Sociedad Española De Cerámica Y Vidrio, 57: 91-100.
Sharma P, Khanduja D, Sharma S (2016). Dry sliding wear investigation of Al6082/Gr metal matrix composites by response surface methodology. Journal of Materials Research and Technology, 5: 29-36.
Siddhartha S, Patnaik A, Bhatt AD (2011). Mechanical and dry sliding wear characterization of epoxy–TiO2 particulate filled functionally graded composites materials using Taguchi design of experiment. Materials & Design, 32: 615-627.
96
Singh BK, Verma K, Thoke A (2015). Adaptive Gradient Descent Backpropagation for Classification of Breast Tumors in Ultrasound Imaging. Procedia Computer Science, 46: 1601-1609.
Suresha B, Chandramohan G, Prakash JN, Balusamy V, Sankaranarayanasamy K (2006). The Role of Fillers on Friction and Slide Wear Characteristics in Glass-Epoxy Composite Systems. Journal of Minerals and Materials Characterization and Engineering, 5: 87-101.
Tanyildizi MS, Özer D, Elibol M (2005). Optimization of α-amylase production by Bacillus sp.
using response surface methodology. Process Biochemistry, 40; 2291-2296.
Tu JV (1996). Advantages and disadvantages of using artificial neural networks versus logistic regression for predicting medical outcomes. Journal of Clinical Epidemiology, 49:
1225-1231.
Witt SF, Witt CA (1992). Modeling and forecasting demand in tourism. Academic, Londra.
Wu TL, Shen BK (2016). Feedback based Neural Networks.
https://web.stanford.edu/class/cs331b/2016/projects/wu_shen.pdf (erişim tarihi:
19.10.2018).
Yılmaz O (2001). Abrasive wear of FeCr (M7C3–M23C6) reinforced iron based metal matrix composites. Materials Science and Technology, 17: 1285-1292.
Youssefi S, Emam-Djomeh Z, Mousavi SM (2009). Comparison of Artificial Neural Network (ANN) and Response Surface Methodology (RSM) in the Prediction of Quality Parameters of Spray-Dried Pomegranate Juice. Drying Technology, 27: 910-917.
Zhang Z, Breidt C, Chang L, Haupert F, Friedrich K (2004). Enhancement of the wear resistance of epoxy. Composites: Part A, 35: 1385-1392.
Zhang Z, Barkoula N, Karger-Kocsis J, Friedrich K (2003). Artificial neural network predictions on erosive wear of polymers. Wear, 255: 708-713.
Zolgharnein J, Shahmoradi A, Ghasemi JB (2013). Comparative study of Box-Behnken, central composite, and Doehlert matrix for multivariate optimization of Pb (II) adsorption ontoRobiniatree leaves. Journal of Chemometrics, 27: 12-20.
97 ÖZGEÇMİŞ
Necip Fazıl KARAKURT, 28/05/1992 yılında Sivas’da doğdu. 2010 yılında Sivas Fen Lisesi’nden mezun oldu. 2010 yılında Orta Doğu Teknik Üniversitesi Endüstri Mühendisliği Bölümüne giriş yaptı ve 2015 yılında mezun oldu. Kısa bir özel sektör tecrübesinden sonra 2016 yılında Namık Kemal Üniversitesi Çorlu Mühendislik Fakültesi Endüstri Mühendisliği Bölümünde Araştırma Görevlisi olarak işe başladı. Aynı yıl Namık Kemal Üniversitesi Fen Bilimleri Enstitüsü Endüstri Mühendisliği Anabilim Dalında Yüksek Lisans eğitimine başladı.
Halen burada çalışmakta ve yüksek lisans eğitimini sürdürmektedir.