6. SONUÇ VE ÖNERĐLER
6.1. Gelecekteki Çalışmalar
Tez çalışmasında önerilen Arıza Duyarlı Matris (ADM) yapısının, otonom bir yapıya sahip, amaca yönelik uzmanlaşmış algoritma/birimler olarak tanımlanan ve Multi Agent System (MAS) olarak isimlendirilen yöntem ile birlikte kullanılmaya uygun olduğu düşünülmektedir. Bundan sonraki çalışmalarda başta güç transformatörleri olmak üzere, çoklu giriş ve birden fazla olasılık barındıran tüm güç sistemleri için bu iki yöntemin bir arada kullanılmasına çalışılacaktır.
KAYNAKLAR
[1] Jin S. H., Scott H. D., Power transformer, Editors: James H. H., Richard C. D., Electric power engineering handbook, 2nd ed., CRC Press, California, 26-48, 2007.
[2] Wang M., Vandermaar A. J., Srivastava K. D., Review of condition assessment of power transformers in service, IEEE Electrical Insulation Magazine, 2002, 18, 12-25.
[3] George V., Frank L., Michael R., Andrew H., Bıqıng W., Intelligent fault diagnosis and prognosis for engineering systems, John Wiley & Sons, 1th ed., New Jersey,2006.
[4] Piush V., Condition monitoring of transformer oil and paper, Doctor of Philosophy, Deemed University, Institute of Engineering & Technology, Patiala, 2005.
[5] Diagnostic testing solutions for power transformers, Omicron Electronics Corp., L-2007, 1-32, 2012.
[6] Sezer M., Trafo bakımı ve yalıtım yağı, 2. basım, Çağdaş Basımevi, Balıkesir, 2009.
[7] Poyser T. D., Yannucci D. A., Templeton J. B., Lenderking B. N., On-line monitoring of power transformers, IEEE Power Engineering Review, 1985, 104, 47-48.
[8] Duval M., Dissolved gas analysis: it can save your transformer, IEEE Electrical Insulation Magazine, 1989, 5, 22-27.
[9] Domun M. K., Condition monitoring of HV transformers using oil analysis techniques, IEE Colloquium on Assessment of Degradation within Transformer Insulation Systems, London, England, 6 December 1991.
[10] Domun M. K., Condition monitoring of power transformers by oil analysis techniques, IEE Colloquium on Condition Monitoring and Remanent Life Assessment in Power Transformers, London, England,6 August 1994.
[11] Darveniza M., Saha T. K., Hill D. J. T., Le T. T., Condition monitoring of the bulk insulation of distribution transformers by electrical and chemical techniques, Properties and Applications of Dielectric Materials, Brisbane, Australia, 3-8 Jul 1994.
[12] Pahlavanpour B., Wilson A., Analysis of transformer oil for transformer condition monitoring, IEEE Liquid Insulation, Brisbane, Australia, 7 January 1997.
[13] Bengtsson C., Status and trends in transformer monitoring, IEEE Transactions on Power Delivery, 1996, 11, 1379-1384.
[14] Harris D., Saravolac M. P., Condition monitoring in power transformers, IEEE Condition Monitoring of Large Machines and Power Transformers, London, England, 19 June 1997.
[15] Myers C., Transformers-conditioning monitoring by oil analysis large or small; contentment or catastrophe, IEEE Power Station Maintenance - Profitability Through Reliability, Edinburgh, Scotland, 30 March - 1 April 1998.
[16] Pahlavanpour B., Roberts A., Transformer oil condition monitoring, IEEE Transformer Life Management, London, England, 22 October 1998.
[17] Heydon R. G., Gronowslci B., Rungis J., Diesendod J., Mitchell F., Condition monitoring of transformer oil, Power Electronic Drives and Energy Systems for Industrial Growth, Lindfield, Australia, 1-3 December 1998.
[18] Leibfried T., Online monitors keep your transformers in service, IEEE Computer Applications in Power, 1998, 11, 36-42.
[19] Donald C., Chairman A. L., On-line monitoring of power transformers and components: a review of key parameters, Electrical Insulation Conference and Electrical Manufacturing & Coil Winding Conference, Cincinnati OH, United States, 26 October, 1999.
[20] Terry K., Napolitano M., Techniques and experience in on-line transformer condition monitoring and fault diagnosis in ElectraNet SA, Power System Technology, Perth, Western Australia, 4-7 December 2000.
[21] Jahromi A. N., Piercy R., Cress S., Jim R. R., Wang F., An approach to power transformer asset management using health index, IEEE Electrical Insulation Magazine,2009, 25, 20-34.
[22] Garcia, B. Burgos, J. C. Alonso, A. M. Sanz, J., A moisture-in-oil model for power transformer monitoring-part I: theoretical foundation, IEEE Transactions on Power Delivery, 2005, 20,1417-1422.
[23] Garcia, B. Burgos, J. C. Alonso, A. M. Sanz, J. , A moisture-in-oil model for power transformer monitoring-part II: experimental verification, IEEE Transactions on Power Delivery, 2005, 20, 1423-1429.
[24] Sunghyun K., Yiseok K., Jooran Y., Sandin K., Sekwang P., Degradation level monitoring sensor for insulating oil of power transformer using capacitive high aspect ratio of electrodes, 13th International Conference on Digest of Technical Papers, Taegu, South Korea, 5-9 June 2005.
[25] Perfecto M., Francisco P., Santiago O., Fernando M., Development of condition monitoring instrumentation for sensing power transformers, 1st International Conference on Sensing Technology, Palmerston North, New Zealand, 21-23 November 2005.
[26] Dragan S. K., Slobodan P. S., Jelena M. L., Monitoring and diagnostics of power transformer insulation, Thermal Science, 2006, 10, 43-54.
[27] Diego R. M., Jacqueline G. R., Zita A. V., DITRANS – A multi-agent system for integrated diagnosis of power transformers, IEEE Power Tech., Lausanne, Switzerland, 1-5 July 2007.
[28] Xiang Z., Ernst G., Asset-management of transformers based on condition monitoring and standard diagnosis, IEEE Electrical Insulation Magazine, 2008,
24,26-40.
[29] Giovanni B., Antonio P., Antonio S., An enhanced fiber-optic temperature sensor system for power transformer monitoring, IEEE Transactions on Instrumentation and Measurement, 2001, 50, 153-158.
[30] Schafer M., Feser K., Thermal monitoring of large power transformers, IEEE International Conference on Electric Power Engineering, Budapest, Hungary, 29 August - 02 September 1999.
[31] Cardillo E., Feser K., New approach in thermal monitoring of large power transformers applied on a 350 MVA ODAF-cooled unit, Advances in Processing, Testing and Application of Dielectric Materials, Wroclaw, Poland, 23 May 2004. [32] Sumaryadi C. B., Pharmatrisanti A., Siregar R., Tamsir Y., Automatic thermal
monitoring on power transformers, IEEE Condition Monitoring and Diagnosis, Beijing, China, 21-24 April 2008.
[33] IEC Committee, Evaluation and qualification of electrical insulation systems, International Electrotechnical Commission, IEC-60505, 1-151, 2011.
[34] Givelberg M., Gurevich S., Lazar N., Zelichonok R., An algorithm and software for distribution transformer operating age monitoring, Electrical and Electronics Engineers, Jerusalem, Israel, 5-6 November 1996.
[35] Aras F., Keleş K., Laboratory experiments for electrical insulation courses using a new high-voltage cell, International Journal of Electrical Engineering Education, 2007, 44, 84-94.
[36] Perkins M., Pettersson L., Fantana N. L., Oornrnen T.V., Jordan S., Transformer life assessment tools with specific application to nuclear power station generator transformers, Electrical Insulation Conference and Electrical Manufacturing & Coil Winding, Cincinnati, United States, 26-28 October 1999.
[37] Herman H., Shenton M. J., Stevens G. C., Heywood R. J., A new approach to condition assessment and lifetime prediction of paper and oil used as transformer insulation, IEEE Solid Dielectrics, Eindhoven, Netherlands, 25-29 June 2001. [38] Thomas P., Shukla A. K., Ageing studies on paper and oil to assess the condition
of solid insulation used in power transformers, IEEE Solid Dielectrics,Eindhoven, Netherlands, 25-29 June 2001.
[39] Wilson A., Lapworth J. A., Defining the life of major assets, IEEE International Conference on Condition Monitoring and Diagnosis, Beijing, China, 21-24 April 2008.
[40] Van B. J. P., Gulski E., Smit J. J., Monitoring and diagnostic of transformer solid insulation, IEEE Transactions On Power Delivery, 2002, 17, 528-536.
[41] Kovacevic S., Dominelli N., Ward B., Transformer life extension by continuous on-line oil conditioning, Electrical Insulation Conference and Electrical Manufacturing & Coil Winding Technology, British Columbia, Canada, 23-25 September 2003.
[42] Reddy C. C., Elizabeth J., Ramu T. S., On the life estimation of oil impregnated paper insulated transformer bushings, Electrical Insulation Conference and Electrical Manufacturing, Nashville, United States, 22-24 October 2007.
[43] Khederzadeh M., Transformer overload management and condition monitoring, IEEE Electrical Insulation, Vancouver, Canada, 9-12 June 2008.
[44] Zhang G. J., Wei J. L., Dong M., Mu H. B., Li H. J., Zhang Y. B., Li Y. M., Yan Z., Lifetime monitoring and estimation strategy for large power transformer, Condition Monitoring and Diagnosis, Beijing, China, 21-24 April 2008.
[45] Minhas M. S. A., Reynders J. P., Klerk P. J., Failures in power system transformers and appropriate monitoring techniques, 11th International Symposium on High-Voltage Engineering,London, England, 23-27 August 1999. [46] Vashishtha Y. D., Ascione P., Su Q., The uncertainty in power transformer fault
diagnostics using conventional testing methods, Australasian Universities Power Engineering Conference, Darwin, Australia, 27-30 September 1999.
[47] Ding X. Q., Hui C., On-line transformer winding’s fault monitoring and condition assessment, Electrical and Electronic Insulating Materials and Applications in Systems, Himeji, Japan, 19-22 November 2001.
[48] Dong M., Yan Z., Li Y., Martin D. J., Fault diagnosis model for power transformers based on information fusion, Institute Of Physics Publishing Measurement Science And Technology, 2005, 16, 15-17.
[49] Hongsheng H., Suxiang Q., Juan W., Zhengjun S., Application of information fusion technology in the remote state on-line monitoring and fault diagnosing system for power transformer, Electronic Measurement and Instruments, Xi'an, China, 16-18 August 2007.
[50] Hongsheng H., Suxiang Q., Jian C., Monitoring and fault diagnosing system design for power transformer based on temperature field model and dga feature extraction, IEEE Intelligent Control & Automation, Chongqing, China, 25-27 June 2008.
[51] James J. D., Transformer oil using fuzzy logic and diagnosis neural networks, IEEE Electrical and Computer Engineering, Vancouver, Canada, 14-17 September 1993.
[52] Zhang Y., Ding X., Liu Y., Griffin P. J., An artificial neural network approach to transformer fault diagnosis, IEEE Transactions on Power Delivery, 1996, 11, 1836-1841.
[53] Booth C., McDonald J. R., The use of artificial neural networks for condition monitoring of electrical power transformers, Neurocomputing , 1998, 23, 97-109. [54] Roizman O., Davydov V., Neuro-fuzzy computing for large power transformers
monitoring and diagnostics, IEEE Fuzzy Information Processing Society, New York, United States, 10-12 June 1999.
[55] Galdi V., lppolito L., Piccolo A., Vaccaro A., Neural diagnostic system for transformer thermal overload protection, Electric Power Application, 2000, 147, 415-421.
[56] Ippolito L., An adaptive fuzzy approach to predictive overload protection systems for power transformers, Automatika, 2004, 45, 169-178.
[57] Wang Z., Liu Y., Griffin P. J., Neural net and expert system diagnose transformer faults, IEEE Computer Applications in Power, 2000, 13, 50-55.
[58] Yang H. T., Liao C. C., Chou J. H., Fuzzy learning vector quantization networks for power transformer condition assessment, IEEE Transactions on Dielectrics and Electrical Insulation, 2001, 8, 143-149.
[59] Osztermayer J., Cardillo E., Markalous S. M., Wimmer R., Lenz M., Hoek S. M., Feser K., Asset management based on improved online monitoring systems applied to a 110/380 kV substation, Power Tech. Conference, Bologna, Italy, 23- 26 June 2003.
[60] Muhammad A, Syed M. I., Abdul K., Power transformer aging and life extension, IEEE Probabilistic Methods Applied to Power Systems, Ames, United States, 16 September 2004.
[61] Marcela P. M., Leonardo T. B., Santos M. M., Vellasco B. R., Power transformers diagnosis using neural networks, IEEE Neural Networks, Orlando, United States, 12-17 August 2007.
[62] Wang H. X., Yang Q. P., Zheng Q. M., Artificial neural network for transformer insulation aging diagnosis, Electric Utility Deregulation and Restructuring and Power Technologies, Nanjing, China, 6-9 April 2008.
[63] Abolfazl S., Parvaneh P., Neural network approach for fault diagnosis of transformers, IEEE Condition Monitoring and Diagnosis, Beijing, China, 21-24 April 2008.
[64] Singh A., Verma P., A review of intelligent diagnostic methods for condition assessment of insulation system in power transformers, IEEE Condition Monitoring and Diagnosis, Beijing, China, 21-24 April 2008.
[65] Pudlo G., Tenbohlen S., Linders M., Krost G., Integration of power transformer monitoring and overload calculation into the power system control surface, IEEE Transmission and Distribution Conference, Yokohama, Japan, 6-10 October 2002.
[66] Bochenski, B. Mosinski, F. Piotrowski, T., Monitoring and forecasting of power transformer ratings DTR computer program, The International Conference on Computer as a Tool, Warsaw, Poland, 9-12 September 2007.
[67] IEEE Working Group, Guide for loading mineral-oil-immersed transformers, The Institute of Electrical and Electronics Engineers, IEEE-C57.91, 1-99, 1995. [68] IEC Committee, Loading guide for oil-immersed power transformers,
International Electrotechnical Commission, IEC 60354, 1-157, 1991.
[69] Susa D., Lehtonen M., Nordman H., Dynamic thermal modeling of power transformers, IEEE Transactions Power Delivery, 2005, 20, 197-204.
[70] Swift G., Molinski T. S., Lehn W., A fundamental approach to transformer thermal modeling, Part I- theory and equivalent circuit, IEEE Transactions Power Delivery, 2001, 16, 171-175.
[71] Asaad A. E., Evaluation of power system harmonic effects on transformers, Doctoral Dissertation, Helsinki University, Power Systems and High Voltage Engineering, Helsinki 2006.
[72] Resende M. J., Pierrat L., Santana J., The transformer thermal loss of life: part 1 - improved deterministic approach for thermal and ageing models, European Transactions on Electrical Power, 2003, 13, 259-265.
[73] IEC Committee, Loading guide for oil-immersed power transformers, International Electrotechnical Commission, IEC 60076-7, 1-113, 2005.
[74] Najdenkoski K., Rafajlovski G., Dimcev V., Thermal aging of distribution transformers according to IEEE and IEC standards, IEEE Power Engineering Society General Meeting, Tampa, United States, 24-28 June 2007.
[75] Bicen Y., Aras F., Ismailoglu H., A realistic method for remaining service life prediction of power transformer, 12th Probabilistic Methods Applied to Power Systems, Istanbul, Turkey, 10-14 June 2012.
[76] Hydroelectric research and technical services group, Facilities instructions, standards, and techniques; transformer diagnostics, United States Department Of The Interior Bureau Of Reclamation, FIST 3-31, 1-45, 2003.
[77] Sen P. K., Sarunpong P., Overloading and loss-of-life assessment guidelines of Oil-cooled transformers, Rural Electric Power Conference, Little Rock, United States, 29 April - 1 May 2001.
[78] McShane C. P., Rapp K. J., Corkran J. L., Gauger G. A., Luksich J., Aging of paper insulation in natural ester dielectric fluid, IEEE Transmission and Distribution Conference and Exposition, Atlanta, United States, 28 October - 2 November 2001.
[79] Smith S. D., Beaster B. L., Design and test experience with natural ester fluid for power transformers update, IEEE Power & Energy Society General Meeting, Calgary, Canada, 26-30 July 2009.
[80] Liao R., Hao J., Chen G., Ma Z., Yang L., A comparative study of physicochemical, dielectric and thermal properties of pressboard insulation impregnated with natural ester and mineral oil, IEEE Transactions on Dielectrics and Electrical Insulation, 2011, 18, 1626-1637.
[81] Bicen Y., Cilliyuz Y., Aras F., Aydugan G., Aging of paper insulation in natural ester & mineral oil, Electrical and Electronic Engineering, 2012, 2 141-146. [82] Biçen Y, Aras F, Đnal M, Đsmailoğlu H., Dissolved gas analysis and fault diagnosis
interface for oil-immersed transformer using fuzzy logic, International Review of Automatic Control, 2012, 5, 414-420.
[83] GE Energy, Hydran M2 instruction manual, General Electric Company, Part- 16374, 1-312, 2006.
[84] Akbari A., Setayeshmehr A., Borsi H., Gockenbach E., Fofana I., Intelligent agent-based system using dissolved gas analysis to detect incipient faults in power transformers, IEEE Electrical Insulation Magazine, 2010, 26, 27-40.
[85] Duval, M., New techniques for dissolved gas-in-oil analysis, IEEE Electrical Insulation Magazine, 2003, 19,6-15.
[86] Brian D. S., Jacques A., Power transformer life extension through better monitoring, GE Energy, PGE-07, 1-8,2007.
[87] M. R., Yük kademe değiştiricisi Oiltap® M kullanma kılavuzu, Maschinen- fabrik Reinhausen,BA-037/06TR, 1-52, 2010.
[88] Du Y., Zahn M., Lesieutre B. C., Mamishev A. V., Lindgren S. R., Moisture equilibrium in transformer paper-oil systems, IEEE Electrical Insulation Magazine, 1999, 15, 11-20.
[89] Hassig M., Braunlich R., Gysi R., Alff J. J., Der H. V., Zaeng W. S., On-site applications of advanced diagnosis methods for quality assessment of insulation of power transformers, Conference on Electrical Insulation and Dielectric Phenomena, Zurich, Switzerland, 14-17 October 2001.
[90] Sweep frequency response analyzer - reliable core and winding diagnosis for power transformers, Omicron Electronics Corp., N-12/07, 1-12, 2007.
[91] Lakhiani V. K., Transformer life management, condition assessment & dissolved gas analysis,Crompton Greaves Ltd.,VKL-190906, 1-160, 2006.
[92] Charles S., Tony M., Sweep frequency response analysis transformer applications, Doble Engineering Company, TP-V1, 1-47, 2003.
[93] Firoozi H., Karami S., Experimental attempts and field experiences to fault diagnosis of power transformers using fra technique, International Review of Electrical Engineering, 2011, 6, 2221-2228.
[94] Odoğlu H., Transformatör testleri, 3. Basım, Best Elektromekanik Sanayi, Balıkesir, 2009.
[95] Van B. J. P., Gulski E., Development of knowledge rules for RVM for interpretation of the condition of transformer insulation, IEEE International Symposium on Electrical Insulation, Anaheim, United States, 2-5 April 2000. [96] García A. T., Power transformer maintenance, field testing, Unitronics-SA,
http://www.unitronics-electric.com/pdf/pw/, (Ziyaret tarihi: 22 Ekim 2012).
[97] Csepes G., Hamos I., A dc expert system (RVM) for checking the refurbishment efficiency of high voltage oil-paper insulating systems using polarization spectrum analysis in range of long time constants, Cigré, Session,Paris, France, 28 August-3 September 1994.
[98] Tapan K. S., Prithwiraj P., Investigations of temperature effects on the dielectric response measurements of transformer oil-paper insulation system, IEEE Transactions On Power Delivery, 2008, 23, 252-260.
[99] Lundgaard L. E., Hansen W., Linhjell D., Terence J. P., Aging of oil-impregnated paper in power transformers, IEEE Transactions Power Delivery, 2004, 19, 230- 239.
[100] Verma P., Roy M., Tiwari R. K., Chandra S., Generation of furanic compounds in transformer oil under accelerated thermal and electrical stress, Electrical Insulation Conference, Indianapolis, United States, 25-26 October 2005.
[101] Hydroelectric research and technical group, Facilities instructions, standards, and techniques: transformer maintenance, Department of the Interior Bureau of Reclamation, D-8450, 1-81, 2000.
[102] Odaoglu H., Best transformer, transformer tests, 3th ed., Best Elektromekanik Sanayi, Balıkesir, 2009.
[103] IEC Committee, Power Transformers-Determination of sound levels, International Electrotechnical Commission, 60076-10/1, 1-95, 2005.
[104] Meijer S., Cichecki P., Agoris P. D., Smit J. J., Reijnders H. F., UHF sensors for partial discharge diagnostics of power transformers, International Conference on Electrical Engineering and Informatics, Bandung, Indonesia, 17-19 June 2007. [105] Barry H. W., Stan L., A survey of developments in insulation monitoring of
power transformers, IEEE Intemational Symposium on Electrical Insulation, Anaheim, USA, 2-5 April 2000.
[106] Gockenbach E., Partial discharge detection and localization in power transformers, Electrical Insululation Dielectric Phenomena, Hannover, Germany, 17-20 October 2004.
[107] Rahmat S., Project L., Tim N., Ryan S., Intelligent transformer monitoring system utilizing neuro-fuzzy technique approach, intelligent substation final project report, Power Systems Engineering Research Center, Pserc/04-27, 1-22, 2004.
[108] Mohamed A. A. W., Hamada M. M., Zeitoun A. G., Ismail G., Novel modeling for the prediction of aged transformer oil characteristics, Electric Power Systems Research, 1999, 51, 61-70.
159
EKLER
Ek-A(1)
161
Ek-A(2)
Ek-A(3)
163
Ek-A(4)
Ek-B(1) Tablo B.1. Yağ analiz sonuçları (Mineral yağ-100 oC)
Factory/Acceptance Test Certificate
Customer : Page No : 1
Serial No.:
Standart : Report No.:
Rated Power(MVA): Rated Voltage(kV): Vector Group:
Oil sample taken at Laboratory / Site on: 26 1 o' clock
from : AA021 - TOP VALVE
AA022 - MIDDLE VALVE AA023 - BOTTOM VALVE
Oil Quality Analysis by IEC 60422 Standard
Evaluated according to IEC 60422
Measurements instruments: Power Factor BAUR -DTL 2 A - Serial No: 053142020
Breakdown Voltage BAUR - DTA 100 C Serial No:0801803003 652 FK Coulometer - METROHM Serial No.: 010/00828 Colour FARBTAFEL Serial No.: VDEW Ölbuch Acid and Base Number - MERCK Serial No.: 0.1 N KOH
Titrator - Mettler Toledo Serial No:
Interfacial Tensiometer - KRÜSS Serial No.: 1210-130 Scale Precise -Serial No: 15854
Customer or Representative:
DATE: 30 1 2012 DATE: DATE:
All the rights are reserved by AREVA T&D Enerji Endüstrisi A.Ş.This report is only valid for the Serial No. specified above.Uncomplete reproduction is forbidden without permission.
ISO 6295
NUMUNE SIRA NO :2177 (MİNERAL YAĞ-100 C-2000 h SONRASI)
ISO 2049 IEC 62021-1 Numerical kV ADH C H E M IC A L L A B O R A T O R Y 2012 0,1285 32,7 O IL S A M P L E T A K E N IEC 60156 Color Number IEC 60814 3,4 0,5 Acidity
Interfacial Tension (IFT) at 25°C
Dielectric Dissipation Factor (DDF) at 90°C
Dielectric Breakdown Voltage Water Content Test Methods IEC 60247 AR-GE 0,00691 76,5 - mgKOH/g oil QUALITY ANALYSIS OF INSULATING OIL
IEC 60422
Limits Characteristics Units Measured Values
Oil sample taken before /during /after Dielectric tests /Temperature-rise test is found in/out of limits. 6 Tested by: Chemical Engineer: Deniz Ertürk mN/m ppm 5126114082
165
Ek-B(2) Tablo B.2. Yağ analiz sonuçları (Doğal ester-100 oC)
Factory/Acceptance Test Certificate
Customer : Page No : 1
Serial No.:
Standart : Report No.:
Rated Power(MVA): Rated Voltage(kV): Vector Group:
Oil sample taken at Laboratory / Site on: 26 1 o' clock
from : AA021 - TOP VALVE
AA022 - MIDDLE VALVE AA023 - BOTTOM VALVE
Oil Quality Analysis by IEC 60422 Standard
Evaluated according to IEC 60422
Measurements instruments: Power Factor BAUR -DTL 2 A - Serial No: 053142020
Breakdown Voltage BAUR - DTA 100 C Serial No:0801803003 652 FK Coulometer - METROHM Serial No.: 010/00828 Colour FARBTAFEL Serial No.: VDEW Ölbuch Acid and Base Number - MERCK Serial No.: 0.1 N KOH
Titrator - Mettler Toledo Serial No:
Interfacial Tensiometer - KRÜSS Serial No.: 1210-130 Scale Precise -Serial No: 15854
Customer or Representative:
DATE: 30 1 2012 DATE: DATE:
All the rights are reserved by AREVA T&D Enerji Endüstrisi A.Ş.This report is only valid for the Serial No. specified above.Uncomplete reproduction is forbidden without permission.
ISO 6295
NUMUNE SIRA NO :2179 (NATURAL ESTER-100 C-2000 h SONRASI)
ISO 2049 IEC 62021-1 Numerical kV ADH C H E M IC A L L A B O R A T O R Y 2012 0,1776 17,7 O IL S A M P L E T A K E N IEC 60156 Color Number IEC 60814 110 1,5 Acidity
Interfacial Tension (IFT) at 25°C
Dielectric Dissipation Factor (DDF) at 90°C
Dielectric Breakdown Voltage Water Content Test Methods IEC 60247 AR-GE 0,064 68,3 - mgKOH/g oil QUALITY ANALYSIS OF INSULATING OIL
IEC 60422
Limits
Characteristics Units Measured
Values
Oil sample taken before /during /after Dielectric tests /Temperature-rise test is found in/out of limits. 8 Tested by: Chemical Engineer: Deniz Ertürk mN/m ppm 5126114082
Ek-B(3) Tablo B.3. Yağ analiz sonuçları (Mineral yağ-140 oC)
Factory/Acceptance Test Certificate
Customer : Page No : 1
Serial No.:
Standart : Report No.:
Rated Power(MVA): Rated Voltage(kV): Vector Group:
Oil sample taken at Laboratory / Site on: 26 1 o' clock
from : AA021 - TOP VALVE
AA022 - MIDDLE VALVE AA023 - BOTTOM VALVE
Oil Quality Analysis by IEC 60422 Standard
Evaluated according to IEC 60422
Measurements instruments: Power Factor BAUR -DTL 2 A - Serial No: 053142020
Breakdown Voltage BAUR - DTA 100 C Serial No:0801803003 652 FK Coulometer - METROHM Serial No.: 010/00828 Colour FARBTAFEL Serial No.: VDEW Ölbuch Acid and Base Number - MERCK Serial No.: 0.1 N KOH
Titrator - Mettler Toledo Serial No:
Interfacial Tensiometer - KRÜSS Serial No.: 1210-130 Scale Precise -Serial No: 15854
Customer or Representative:
DATE: 30 1 2012 DATE: DATE:
All the rights are reserved by AREVA T&D Enerji Endüstrisi A.Ş.This report is only valid for the Serial No. specified above.Uncomplete reproduction is forbidden without permission.
ISO 6295
NUMUNE SIRA NO :2178 (MİNERAL YAĞ-140 C-2000 h SONRASI)
ISO 2049 IEC 62021-1 Numerical kV ADH C H E M IC A L L A B O R A T O R Y 2012 0,2428 ANALİZ EDİLEMEDİ O IL S A M P L E T A K E N IEC 60156 Color Number IEC 60814 10,8 8 Acidity
Interfacial Tension (IFT) at 25°C
Dielectric Dissipation Factor (DDF) at 90°C
Dielectric Breakdown Voltage Water Content Test Methods IEC 60247 AR-GE 0,1461 71 - mgKOH/g oil QUALITY ANALYSIS OF INSULATING OIL
IEC 60422
Limits
Characteristics Units Measured
Values
Oil sample taken before /during /after Dielectric tests /Temperature-rise test is found in/out of limits. 7 Tested by: Chemical Engineer: Deniz Ertürk mN/m ppm 5126114082
167
Ek-B(4) Şekil B.4. Yağ analiz sonuçları (Doğal ester-140 oC)
Factory/Acceptance Test Certificate
Customer : Page No : 1
Serial No.:
Standart : Report No.:
Rated Power(MVA): Rated Voltage(kV): Vector Group:
Oil sample taken at Laboratory / Site on: 26 1 o' clock
from : AA021 - TOP VALVE
AA022 - MIDDLE VALVE AA023 - BOTTOM VALVE
Oil Quality Analysis by IEC 60422 Standard
Evaluated according to IEC 60422
Measurements instruments: Power Factor BAUR -DTL 2 A - Serial No: 053142020
Breakdown Voltage BAUR - DTA 100 C Serial No:0801803003 652 FK Coulometer - METROHM Serial No.: 010/00828 Colour FARBTAFEL Serial No.: VDEW Ölbuch Acid and Base Number - MERCK Serial No.: 0.1 N KOH
Titrator - Mettler Toledo Serial No:
Interfacial Tensiometer - KRÜSS Serial No.: 1210-130 Scale Precise -Serial No: 15854
Customer or Representative:
DATE: 30 1 2012 DATE: DATE:
All the rights are reserved by AREVA T&D Enerji Endüstrisi A.Ş.This report is only valid for the Serial No. specified above.Uncomplete reproduction is forbidden without permission.
mgKOH/g oil
Oil sample taken before /during /after Dielectric tests /Temperature-rise test is found in/out of limits.
IEC 60247 9 Tested by: Chemical Engineer: Deniz Ertürk mN/m ppm 5126114082 - 2,5
QUALITY ANALYSIS OF INSULATING OIL
IEC 60422
Limits Characteristics Test Methods Units Measured Values