Doç.Dr. Kerem Altuğ GÜLER Doç.Dr. Kerem Altuğ GÜLER Kişisel Bilgiler
Kişisel Bilgiler
İş Telefo nu:
İş Telefo nu: +90 212 383 4685 D iğer E-po sta:
D iğer E-po sta: keremaltug@gmail.com W eb:
W eb: https://avesis.yildiz.edu.tr/kguler
Eğitim Bilgileri Eğitim Bilgileri
Doktora, Yıldız Teknik Üniversitesi, Kimya Metalurji Fakültesi, Metalurji Ve Malzeme Mühendisliği Bölümü, Türkiye 2005 - 2012
Yüksek Lisans, Yıldız Teknik Üniversitesi, Kimya Metalurji Fakültesi, Metalurji Ve Malzeme Mühendisliği, Türkiye 2003 - 2005
Lisans, Yıldız Teknik Üniversitesi, Kimya Metalurji Fakültesi, Metalurji Ve Malzeme Mühendisliği, Türkiye 1999 - 2003
Yabancı Diller Yabancı Diller
İngilizce, B2 Orta Üstü
Yaptığı Tezler Yaptığı Tezler
Doktora, Hassas dökümde boyutsal hassasiyete ve yüzey kalitesine etki eden unsurlar, Yıldız Teknik Üniversitesi, Kimya Metalurji Fakültesi, Metalurji Ve Malzeme Mühendisliği Bölümü / Malzeme A.B.D. , 2012
Yüksek Lisans, Dereceli hassas döküm kalıplarında segregasyon oluşumunun incelenmesi, Yıldız Teknik Üniversitesi, Kimya Metalurji Fakültesi, Metalurji Ve Malzeme Mühendisliği Bölümü / Malzeme A.B.D., 2005
Araştırma Alanları Araştırma Alanları
Metalurji ve Malzeme Mühendisliği, Malzeme Bilimi ve Mühendisliği, Mühendislik ve Teknoloji
Akademik Unvanlar / Görevler Akademik Unvanlar / Görevler
Doç.Dr., Yıldız Teknik Üniversitesi, Kimya-Metalurji Fakültesi, Metalurji Ve Malzeme Mühendisliği, 2016 - Devam Ediyor
Yönetilen Tezler Yönetilen Tezler
Güler K. A. , Alüminyum alaşımlarının dökümünde yörüngesel çalkalamanın mikroyapı ve mekanik özelliklere etkisi, Yüksek Lisans, Ö.KILIÇ(Öğrenci), 2020
Güler K. A. , A356 ve A380 alaşımlarının eğimli soğutucu ile dökümü ve yarı katı dövme işlemi, Yüksek Lisans, N.AÇİCİ(Öğrenci), 2018
Güler K. A. , Alüminyum matrisli titanyumdiborür in situ takviyeli kompozitlerin üretimi ve karakterizasyonu, Yüksek Lisans, A.AYÇA(Öğrenci), 2018
Güler K. A. , Alüminyum dolu kalıba döküm uygulamalarında model yoğunluğunun poroziteye etkisi, Yüksek Lisans,
S.KARA(Öğrenci), 2015
SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler
I. Pro ducing no n-dendritic A356 and A380 feedsto cks: Evaluatio n o f the effects o f co o ling slo pePro ducing no n-dendritic A356 and A380 feedsto cks: Evaluatio n o f the effects o f co o ling slo pe casting parameters
casting parameters ACAR S., GÜLER K. A.
MATERIALS TESTING, cilt.62, sa.11, ss.1147-1152, 2020 (SCI İndekslerine Giren Dergi)
II. Investigatio n o f the surface quality and dimensio nal accuracy o f po lymer patterns pro duced byInvestigatio n o f the surface quality and dimensio nal accuracy o f po lymer patterns pro duced by selective laser sintering (SL S) metho d fo r investment casting (IC)
selective laser sintering (SL S) metho d fo r investment casting (IC)
Özer G., Özbay B., Öter Z. Ç. , Tarakçı G., Yılmaz M. S. , Bulduk M. E. , Koç E., Acar S., Güler K. A.
International Journal Of Cast Metals Research, cilt.25, sa.3, ss.146-152, 2020 (SCI Expanded İndekslerine Giren Dergi)
III. A Preliminary Study Upo n the Applicability o f the D irect W ater Co o ling with the L o st F o am CastingA Preliminary Study Upo n the Applicability o f the D irect W ater Co o ling with the L o st F o am Casting Pro cess
Pro cess
ACAR S., GÜLER K. A.
INTERNATIONAL JOURNAL OF METALCASTING, 2020 (SCI İndekslerine Giren Dergi)
IV. Evaluatio n o f the reheating behavio r o f the co o ling slo pe cast A356 and A380 aluminum allo ysEvaluatio n o f the reheating behavio r o f the co o ling slo pe cast A356 and A380 aluminum allo ys Acar S., Açıcı N., Güler K. A.
MATERIALS RESEARCH EXPRESS, cilt.6, sa.12, 2019 (SCI İndekslerine Giren Dergi)
V. Co o ling slo pe casting o f AA7075 allo y co mbined with reheating and thixo fo rgingCo o ling slo pe casting o f AA7075 allo y co mbined with reheating and thixo fo rging Güler K. A. , Kısasöz A., Ozer G., Karaaslan A.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, cilt.29, ss.2237-2244, 2019 (SCI İndekslerine Giren Dergi)
VI. A Study o n Al/Cu Bimetal Pro ductio n by L o st F o am CastingA Study o n Al/Cu Bimetal Pro ductio n by L o st F o am Casting ACAR S., GECÜ R., KISASÖZ A., GÜLER K. A. , KARAASLAN A.
PRAKTISCHE METALLOGRAPHIE-PRACTICAL METALLOGRAPHY, cilt.55, sa.11, ss.728-740, 2018 (SCI İndekslerine Giren Dergi)
VII. Investigatio n o f carbo n co ntaminatio n in lo st fo am castings o f lo w carbo n steelInvestigatio n o f carbo n co ntaminatio n in lo st fo am castings o f lo w carbo n steel KILIÇ Ö., ACAR S., KISASÖZ A., GÜLER K. A.
CHINA FOUNDRY, cilt.15, sa.5, ss.384-389, 2018 (SCI İndekslerine Giren Dergi)
VIII. Influence o f T6 heat treatment o n A356 and A380 aluminium allo ys manufactured by thixo fo rgingInfluence o f T6 heat treatment o n A356 and A380 aluminium allo ys manufactured by thixo fo rging co mbined with lo w superheat casting
co mbined with lo w superheat casting
GECÜ R., ACAR S., KISASÖZ A., ALTUG GULER K. A. , KARAASLAN A.
Transactions of Nonferrous Metals Society of China (English Edition), cilt.28, sa.3, ss.385-392, 2018 (SCI İndekslerine Giren Dergi)
IX. The develo pment o f an expansive type special cement bo nded investment po wder fo r castings o fThe develo pment o f an expansive type special cement bo nded investment po wder fo r castings o f no n ferro us metals and allo ys
no n ferro us metals and allo ys Kutbay I., GÜLER K. A. , ÇİĞDEM M.
INTERNATIONAL JOURNAL OF CAST METALS RESEARCH, cilt.31, sa.4, ss.237-248, 2018 (SCI İndekslerine Giren Dergi)
X. Characterizatio n o f Mechanical Pro perties and Co rro sio n Behavio urs o f Mn and Al Bro nze CastingsCharacterizatio n o f Mechanical Pro perties and Co rro sio n Behavio urs o f Mn and Al Bro nze Castings Turker M., ACAR S., CÖMERT Z. Y. , KISASÖZ A., GÜLER K. A.
PRAKTISCHE METALLOGRAPHIE-PRACTICAL METALLOGRAPHY, cilt.55, sa.1, ss.5-18, 2018 (SCI İndekslerine Giren Dergi)
XI. Investigatio n o f spherisatio n in micro structures o f aluminium casting allo ys fo r thixo fo rging pro cessInvestigatio n o f spherisatio n in micro structures o f aluminium casting allo ys fo r thixo fo rging pro cess GÜLER K. A. , GECÜ R., KISASÖZ A., KARAASLAN A.
RUSSIAN JOURNAL OF NON-FERROUS METALS, cilt.58, sa.5, ss.489-494, 2017 (SCI İndekslerine Giren Dergi) XII. Influence o f Orbital Shaking o n Micro structure and Mechanical Pro perties o f A380 Aluminium Allo yInfluence o f Orbital Shaking o n Micro structure and Mechanical Pro perties o f A380 Aluminium Allo y
Pro duced by L o st F o am Casting Pro duced by L o st F o am Casting
KISASÖZ A., GÜLER K. A. , KARAASLAN A.
RUSSIAN JOURNAL OF NON-FERROUS METALS, cilt.58, sa.3, ss.238-243, 2017 (SCI İndekslerine Giren Dergi) XIII. A Co mparative Study o n the Micro structure Evaluatio n o f Thixo fo rged A356 and A380 AluminiumA Co mparative Study o n the Micro structure Evaluatio n o f Thixo fo rged A356 and A380 Aluminium
Allo ys Allo ys
GÜLER K. A. , GECÜ R., KISASÖZ A., KARAASLAN A.
PRAKTISCHE METALLOGRAPHIE-PRACTICAL METALLOGRAPHY, cilt.54, sa.3, ss.163-177, 2017 (SCI İndekslerine Giren Dergi)
XIV. D ry Sliding W ear Behavio r o f Cast A7075 and A7075/SAF 2205 Co mpo site MaterialD ry Sliding W ear Behavio r o f Cast A7075 and A7075/SAF 2205 Co mpo site Material KARAASLAN A., KISASÖZ A., ATAPEK Ş. H. , GÜLER K. A.
HIGH TEMPERATURE MATERIALS AND PROCESSES, cilt.35, sa.5, ss.487-492, 2016 (SCI İndekslerine Giren Dergi) XV. Experimental Research o n Pro perties o f Naval Brass CastingsExperimental Research o n Pro perties o f Naval Brass Castings
Turker M., CÖMERT Z. Y. , KISASÖZ A., GÜLER K. A.
PRAKTISCHE METALLOGRAPHIE-PRACTICAL METALLOGRAPHY, cilt.53, sa.1, ss.24-35, 2016 (SCI İndekslerine Giren Dergi)
XVI. So lid mo ld investment casting - A replicatio n pro cess fo r o pen-cell fo am metal pro ductio nSo lid mo ld investment casting - A replicatio n pro cess fo r o pen-cell fo am metal pro ductio n GÜLER K. A.
MATERIALS TESTING, cilt.57, sa.9, ss.795-798, 2015 (SCI İndekslerine Giren Dergi)
XVII. A study o f expanded po lyethylene (EPE) pattern applicatio n in aluminium lo st fo am castingA study o f expanded po lyethylene (EPE) pattern applicatio n in aluminium lo st fo am casting GÜLER K. A. , KISASÖZ A., KARAASLAN A.
RUSSIAN JOURNAL OF NON-FERROUS METALS, cilt.56, sa.2, ss.171-176, 2015 (SCI İndekslerine Giren Dergi) XVIII. W ear pro perties o f squeeze cast in situ Mg2Si-A380 allo yW ear pro perties o f squeeze cast in situ Mg2Si-A380 allo y
LUŞ H. M. , Özer G., Güler K. A. , Erzi E., Dışpınar D.
INTERNATIONAL JOURNAL OF CAST METALS RESEARCH, cilt.28, sa.1, ss.59-64, 2015 (SCI İndekslerine Giren Dergi)
XIX. Investigatio n o f Al/Steel Bimetal Co mpo site F abricatio n by Vacuum Assisted So lid Mo uld InvestmentInvestigatio n o f Al/Steel Bimetal Co mpo site F abricatio n by Vacuum Assisted So lid Mo uld Investment Casting
Casting
GÜLER K. A. , KISASÖZ A., KARAASLAN A.
ACTA PHYSICA POLONICA A, cilt.126, sa.6, ss.1327-1330, 2014 (SCI İndekslerine Giren Dergi)
XX. F abricatio n o f Al/Mg bimetal co mpo und casting by lo st fo am technique and liquid-so lid pro cessF abricatio n o f Al/Mg bimetal co mpo und casting by lo st fo am technique and liquid-so lid pro cess GÜLER K. A. , KISASÖZ A., KARAASLAN A.
Materialpruefung/Materials Testing, cilt.56, sa.9, ss.700-702, 2014 (SCI İndekslerine Giren Dergi)
XXI. Effects o f pattern co ating and vacuum assistance o n po ro sity o f aluminium lo st fo am castingsEffects o f pattern co ating and vacuum assistance o n po ro sity o f aluminium lo st fo am castings GÜLER K. A. , KISASÖZ A., KARAASLAN A.
Russian Journal of Non-Ferrous Metals, cilt.55, sa.5, ss.424-428, 2014 (SCI İndekslerine Giren Dergi) XXII. Investigatio n o f lo st fo am casted aluminum bimetal micro structuresInvestigatio n o f lo st fo am casted aluminum bimetal micro structures
GÜLER K. A. , KISASÖZ A., KARAASLAN A.
Materialpruefung/Materials Testing, cilt.56, sa.9, ss.737-740, 2014 (SCI İndekslerine Giren Dergi) XXIII. Investigatio n o f surface ro ughness o f aluminium so lid mo uld investment castingsInvestigatio n o f surface ro ughness o f aluminium so lid mo uld investment castings
Guler K. A.
RUSSIAN JOURNAL OF NON-FERROUS METALS, cilt.54, sa.6, ss.480-483, 2013 (SCI İndekslerine Giren Dergi) XXIV. The fabricatio n and characterizatio n o f Al/SiC-MMC castings pro duced by vacuum assistedThe fabricatio n and characterizatio n o f Al/SiC-MMC castings pro duced by vacuum assisted
so lidmo uld investment casting pro cess so lidmo uld investment casting pro cess Guler K. A. , KISASÖZ A., KARAASLAN A.
RUSSIAN JOURNAL OF NON-FERROUS METALS, cilt.54, sa.4, ss.320-324, 2013 (SCI İndekslerine Giren Dergi) XXV. D rilling Template Used to Pro duce Cellular EPS Patterns fo r the L o st F o am Casting Pro cessD rilling Template Used to Pro duce Cellular EPS Patterns fo r the L o st F o am Casting Pro cess
GÜLER K. A. , Uster A., ÇİĞDEM M.
MATERIALS TESTING, cilt.55, sa.1, ss.60-63, 2013 (SCI İndekslerine Giren Dergi)
XXVI. The Effects o f Pro cess Parameters o n the Recycling Efficiency o f Used Aluminium Beverage CansThe Effects o f Pro cess Parameters o n the Recycling Efficiency o f Used Aluminium Beverage Cans (UBCs)
(UBCs)
Ozer G., YUKSEL C., COMERT Z. Y. , GULER K. A.
MATERIALS TESTING, cilt.55, sa.5, ss.396-400, 2013 (SCI İndekslerine Giren Dergi)
XXVII. Effects o f W ax Co ating o n the Surface Quality o f EPS Patterns fo r So lid Mo uld Investment CastingEffects o f W ax Co ating o n the Surface Quality o f EPS Patterns fo r So lid Mo uld Investment Casting GÜLER K. A.
MATERIALS TESTING, cilt.55, sa.3, ss.193-196, 2013 (SCI İndekslerine Giren Dergi)
XXVIII. Infiltratio n o f A6063 aluminium allo y into SiC-B4C hybrid prefo rms using vacuum assisted blo ckInfiltratio n o f A6063 aluminium allo y into SiC-B4C hybrid prefo rms using vacuum assisted blo ck mo uld investment casting technique
mo uld investment casting technique KISASÖZ A., GÜLER K. A. , KARAASLAN A.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, cilt.22, sa.7, ss.1563-1567, 2012 (SCI İndekslerine Giren Dergi)
XXIX. Effects o f Squeeze Pressure o n Micro structure, Po ro sity and Hardness o f an In-Situ Mg2Si/Al-Si-CuEffects o f Squeeze Pressure o n Micro structure, Po ro sity and Hardness o f an In-Situ Mg2Si/Al-Si-Cu Co mpo site
Co mpo site
Ozer G., Guler K. A. , LUŞ H. M.
MATERIALS TESTING, cilt.54, sa.1, ss.26-29, 2012 (SCI İndekslerine Giren Dergi) XXX. The Evaluatio n o f W aste Papers fo r the Ceramic industryThe Evaluatio n o f W aste Papers fo r the Ceramic industry
SELTE A., GÜLER K. A. , Marsoglu M.
MATERIALS TESTING, cilt.54, sa.2, ss.126-129, 2012 (SCI İndekslerine Giren Dergi)
XXXI. Mechanical pro perties o f A6063/ SiC co mpo sites pro duced using the lo st fo am casting pro cessMechanical pro perties o f A6063/ SiC co mpo sites pro duced using the lo st fo am casting pro cess Güler K. A. , Kisasoz A., Yuksel C., Karaaslan A.
Materialpruefung/Materials Testing, cilt.54, sa.3, ss.189-192, 2012 (SCI İndekslerine Giren Dergi) XXXII. A no vel metho d fo r Al/SiC co mpo site fabricatio n: L o st fo am castingA no vel metho d fo r Al/SiC co mpo site fabricatio n: L o st fo am casting
GÜLER K. A. , KISASÖZ A., KARAASLAN A.
International Journal of Materials Research, cilt.102, sa.3, ss.304-308, 2011 (SCI İndekslerine Giren Dergi) XXXIII. Pro ductio n o f Open Cell Aluminium Metal F o am with L o st F o am TechniquePro ductio n o f Open Cell Aluminium Metal F o am with L o st F o am Technique
GÜLER K. A. , Taslicukur Z., Ozer G.
MATERIALS TESTING, cilt.53, sa.5, ss.295-297, 2011 (SCI İndekslerine Giren Dergi)
XXXIV. Surface Quality and D imensio nal Accuracy o f Gypsum Bo nded Investment F lask Casting Mo uldsSurface Quality and D imensio nal Accuracy o f Gypsum Bo nded Investment F lask Casting Mo ulds GÜLER K. A. , ÇİĞDEM M.
MATERIALS TESTING, cilt.53, sa.9, ss.551-555, 2011 (SCI İndekslerine Giren Dergi) XXXV. F abricatio n and characterizatio n o f SiC prefo rms fo r metal matrix co mpo sitesF abricatio n and characterizatio n o f SiC prefo rms fo r metal matrix co mpo sites
Kisasoz A., Güler K. A. , Karaaslan A.
Materialpruefung/Materials Testing, cilt.53, ss.54-57, 2011 (SCI İndekslerine Giren Dergi) XXXVI. Cellular Aluminum F o am Metal Pro ductio n W ith Space Ho lder ParticlesCellular Aluminum F o am Metal Pro ductio n W ith Space Ho lder Particles
GÜLER K. A. , Taslicukur Z.
MATERIALPRUFUNG, cilt.52, sa.6, ss.379-382, 2010 (SCI Expanded İndekslerine Giren Dergi)
Diğer Dergilerde Yayınlanan Makaleler Diğer Dergilerde Yayınlanan Makaleler
I. Aluminium Bimetal Structure Pro ductio n by L o st F o am Casting with L iquid-L iquid Pro cessAluminium Bimetal Structure Pro ductio n by L o st F o am Casting with L iquid-L iquid Pro cess Kısasöz A., Guler K. A. , Karaaslan A.
Machines, Technologies, Materials, cilt.8, sa.10, ss.43-46, 2014 (Diğer Kurumların Hakemli Dergileri)
II. F abricatio n o f Al-Steel Co mpo sites by Vacuum Assisted Blo ck Mo uld Investment Casting TechniqueF abricatio n o f Al-Steel Co mpo sites by Vacuum Assisted Blo ck Mo uld Investment Casting Technique Güler K. A. , Kısasöz A., Karaaslan A.
Machines Technologies Materials, cilt.8, sa.10, ss.47-49, 2014 (Diğer Kurumların Hakemli Dergileri)
III. Metal Matrisli Ko mpo zitlerin Vakum İnfiltrasyo nla D ereceli Hassas D ö küm Kalıplarında ÜretimiMetal Matrisli Ko mpo zitlerin Vakum İnfiltrasyo nla D ereceli Hassas D ö küm Kalıplarında Üretimi Güler K. A. , KARAASLAN A.
Metalurji, cilt.170, ss.34-38, 2014 (Hakemsiz Dergi)
IV. Expanded Po lystyrene (EPS) Pattern Applicatio n in Investment Casting and Chemical Remo vingExpanded Po lystyrene (EPS) Pattern Applicatio n in Investment Casting and Chemical Remo ving GÜLER K. A. , Taslicukur Z., Ozer G.
Materialy Ceramiczne/Ceramic Materials, cilt.63, sa.1, ss.138-142, 2011 (Diğer Kurumların Hakemli Dergileri)
Kitap & Kitap Bölümleri Kitap & Kitap Bölümleri
I. D ereceli Hassas D ö küm, Yüzey Kalitesi ve Bo yutsal Hassasiyet (Kısaltılmış D o kto ra Tezi)D ereceli Hassas D ö küm, Yüzey Kalitesi ve Bo yutsal Hassasiyet (Kısaltılmış D o kto ra Tezi) GÜLER K. A.
İstanbul Sanayi Odası Yayınları, 2012
Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar
I. The effect o f o rbital shaking o n the micro structure o f lo st fo am cast A356 aluminum allo yThe effect o f o rbital shaking o n the micro structure o f lo st fo am cast A356 aluminum allo y Kılıç Ö., Acar S., Güler K. A.
9th International Aluminium Symposium, İstanbul, Türkiye, 10 - 11 Ekim 2019, ss.256-260
II. A Study o n the Effects o f So lutio n Heat Treatment Time o n Eutectic Silico n Mo rpho lo gy fo r A380A Study o n the Effects o f So lutio n Heat Treatment Time o n Eutectic Silico n Mo rpho lo gy fo r A380 Allo y
Allo y
ACAR S., GECÜ R., KISASÖZ A., GÜLER K. A. , KARAASLAN A.
19th International Metallurgy and Materials Congress, İstanbul, Türkiye, 25 Ekim 2018, ss.304-306
III. Effects o f Reheating Time o n Hardness and Micro structural Pro perties o f Thixo fo rged AA2014 Allo yEffects o f Reheating Time o n Hardness and Micro structural Pro perties o f Thixo fo rged AA2014 Allo y Manufactured via Co o ling Slo pe Casting
Manufactured via Co o ling Slo pe Casting ACAR S., GÜLER K. A.
19th International Metallurgy and Materials Congress, İstanbul, Türkiye, 25 Ekim 2018, ss.269-271 IV. D ry Sliding W ear Pro perties o f AA7075 Aluminium Matrix Hybrid Co mpo sitesD ry Sliding W ear Pro perties o f AA7075 Aluminium Matrix Hybrid Co mpo sites
GECÜ R., ACAR S., KISASÖZ A., GÜLER K. A. , KARAASLAN A.
2. International Conference on Engineering Technology and Innovation (ICETI), Budapeşte, Macaristan, 07 Mart 2018, ss.295-300
V. Investigatio n o f the Effects o f So lutio n Heat Treatmeant Time o n the Eutectic Silico n fo r A356 Allo yInvestigatio n o f the Effects o f So lutio n Heat Treatmeant Time o n the Eutectic Silico n fo r A356 Allo y ACAR S., GECÜ R., KISASÖZ A., GÜLER K. A. , KARAASLAN A.
2. International Conference on Engineering Technology and Innovation (ICETI), Budapeşte, Macaristan, 07 Mart 2018, ss.268-272
VI. Co o ling Slo pe Casting and Thixo fo rging o f A319 Allo yCo o ling Slo pe Casting and Thixo fo rging o f A319 Allo y ACAR S., GÜLER K. A.
2. International Conference on Engineering Technology and Innovation (ICETI), Budapeşte, Macaristan, 07 Mart 2018, ss.57-62
VII. A356 Alaşımının Eğimli So ğutucu İle D ö kümü ve Yarı-Katı D ö vme İşlemiA356 Alaşımının Eğimli So ğutucu İle D ö kümü ve Yarı-Katı D ö vme İşlemi Açıcı N., ACAR S., GÜLER K. A.
8. Alüminyum Sempozyumu, İstanbul, Türkiye, 05 Ekim 2017, ss.294-298 VIII. A356 Matrisli TiB2 Takviyeli İn-Situ Ko mpo zit ÜretimiA356 Matrisli TiB2 Takviyeli İn-Situ Ko mpo zit Üretimi
Kısasöz A. A. , KISASÖZ A., GÜLER K. A.
8. Alüminyum Sempozyumu, İstanbul, Türkiye, 05 Ekim 2017, ss.290-293
IX. Aging o f A356 Aluminum Billets Pro duced by Semi-So lid Metal Pro cessingAging o f A356 Aluminum Billets Pro duced by Semi-So lid Metal Pro cessing GECÜ R., ACAR S., KISASÖZ A., GÜLER K. A. , KARAASLAN A.
3rd International Iron & Steel Symposium, Karabük, Türkiye, 03 Nisan 2017, ss.267-270
X. Micro structural Evaluatio n o f T6-Treated A380 Allo y Manufactured by Semi-So lid Metal CastingMicro structural Evaluatio n o f T6-Treated A380 Allo y Manufactured by Semi-So lid Metal Casting GECÜ R., ACAR S., KISASÖZ A., GÜLER K. A. , KARAASLAN A.
International Conference on Engineering Technology and Innovation, Sarajevo, Bosna-Hersek, 22 Mart 2017, ss.284-288
XI. Co rro sio n, Mechanical and Micro structural Characteristics o f Mo dified Navy G Bro nze CastsCo rro sio n, Mechanical and Micro structural Characteristics o f Mo dified Navy G Bro nze Casts TURKER M., ACAR S., CÖMERT Z. Y. , KISASÖZ A., GÜLER K. A.
International Conference on Engineering Technology and Innovation, Sarajevo, Bosna-Hersek, 22 Mart 2017, ss.303-305
XII. Micro structural Evaluatio n o f Thixo fo rged A380 Allo y Billets Pro duced by L o w Superheat CastingMicro structural Evaluatio n o f Thixo fo rged A380 Allo y Billets Pro duced by L o w Superheat Casting Pro cess
Pro cess
GÜLER K. A. , KISASÖZ A., KARAASLAN A., ÖZER G.
18th International Metallurgy & Materials Congress, İstanbul, Türkiye, 29 Eylül 2016, ss.659-662 XIII. Manufacturing and Aging o f 7075 Based Metal-Metal Co mpo sites by Using Sawdusts asManufacturing and Aging o f 7075 Based Metal-Metal Co mpo sites by Using Sawdusts as
Reinfo rcements Reinfo rcements
GECÜ R., KISASÖZ A., GÜLER K. A. , KARAASLAN A.
18th International Metallurgy & Materials Congress, İstanbul, Türkiye, 29 Eylül 2016, ss.114-117 XIV. L o st F o am Casting with EPS Patterns in D ifferent D ensitiesL o st F o am Casting with EPS Patterns in D ifferent D ensities
KARA S., GÜLER K. A. , KISASÖZ A.
International Conference on Advances in Mechanical Engineering (ICAME'15), İstanbul, Türkiye, 13 Mayıs 2015, ss.1133-1136
XV. In Situ Co mpo site o f (Mg2Si)/Al F abricated by Squeeze CastingIn Situ Co mpo site o f (Mg2Si)/Al F abricated by Squeeze Casting Ozer G., GÜLER K. A.
TMS 2012, 141st Annual Meeting & Exhibition, 01 Mart 2012
XVI. Casting Quality o f Gypsum Bo nded Blo ck Investment Casting Mo uldsCasting Quality o f Gypsum Bo nded Blo ck Investment Casting Mo ulds GÜLER K. A. , ÇİĞDEM M.
14th International Conference on Advances in Materials and Processing Technologies (AMPT), İstanbul, Türkiye, 13 - 16 Temmuz 2011, cilt.445, ss.349-354
XVII. Vakum D estekli D ereceli Hassas D ö kümde Alçı Bağlı Kalıp Malzemelerinin D ö küm KalitesiVakum D estekli D ereceli Hassas D ö kümde Alçı Bağlı Kalıp Malzemelerinin D ö küm Kalitesi GÜLER K. A. , Çiğdem M.
4. Döküm ve Çevre Sempozyumu (IFES 2011), 01 Kasım 2011
XVIII. Açık Hücreli Hücresel Metal Üretimi İçin Yeni Bir Yaklaşım Olarak D o lu Kalıba D ö küm TekniğininAçık Hücreli Hücresel Metal Üretimi İçin Yeni Bir Yaklaşım Olarak D o lu Kalıba D ö küm Tekniğinin Uygulanması
Uygulanması
GÜLER K. A. , Üster A., Çiğdem M.
4. Döküm ve Çevre Sempozyumu (IFES 2011), 01 Kasım 2011
XIX. Pro ductio n o f Al2O3-Al Co mpo sites Using Vacuum Assted Blo ck Mo ld Investment CastingPro ductio n o f Al2O3-Al Co mpo sites Using Vacuum Assted Blo ck Mo ld Investment Casting KISASÖZ A., GÜLER K. A. , KARAASLAN A.
8th International PhD foundry Conference, Czech Republic, Brno, Çek Cumhuriyeti, 07 Haziran 2011, ss.18-20 XX. The effect o f different bo nded investment po wders o n surface quality and dimensio nal accuracy o fThe effect o f different bo nded investment po wders o n surface quality and dimensio nal accuracy o f
investment castings investment castings GÜLER K. A. , Cigdem M.
8th International PhD Foundry Conference, 01 Haziran 2011
XXI. Aluminum Matrix Co mpo site F abricatio n by Infiltratio n o f SiC Prefo rms Using Squeeze CastingAluminum Matrix Co mpo site F abricatio n by Infiltratio n o f SiC Prefo rms Using Squeeze Casting Technique
Technique
Özer G., Kısasöz A., Güler K. A.
8th International PhD Foundry Conference, Czech Republic, 01 Mayıs 2011, cilt.1, ss.1-9 XXII. L o st fo am casting technique applicatio ns fo r Al/SiC co mpo site pro ductio nL o st fo am casting technique applicatio ns fo r Al/SiC co mpo site pro ductio n
KISASÖZ A., GÜLER K. A. , KARAASLAN A.
69th World Foundry Congress 2010, WFC 2010, Hangzhou, Çin, 16 - 20 Ekim 2010, cilt.2, ss.573-576 XXIII. A no vel pattern material fo r investment casting fo am waxA no vel pattern material fo r investment casting fo am wax
Güler K. A. , Özer G., Taşlıçukur Z.
69th World Foundry Congress (WFC 2010), Hangzhou, Çin, 16 - 20 Ekim 2010, ss.567-572 XXIV. Çimento Bağlayıcılı Genleşebilen D ereceli Hassas D ö küm Kalıbı To zu ÜretimiÇimento Bağlayıcılı Genleşebilen D ereceli Hassas D ö küm Kalıbı To zu Üretimi
GÜLER K. A. , Çiğdem M.
3. Döküm ve Çevre Semozyumu (IFES2009), 01 Ocak 2010
XXV. Besleyici Gö mleklerin Üretimi İçin Çevreye D uyarlı Yeni Bir Yö ntemBesleyici Gö mleklerin Üretimi İçin Çevreye D uyarlı Yeni Bir Yö ntem GÜLER K. A. , Gin E., Şen Ö., Çiğdem M.
3. Döküm ve Çevre Sempozyumu, (IFES 2009), 01 Ocak 2010
XXVI. 380 Alaşımın So ğuma Eğrisinde ve Akışkanlığında Tane İnceltmenin Etkisi380 Alaşımın So ğuma Eğrisinde ve Akışkanlığında Tane İnceltmenin Etkisi Balaban C., Şen Ö., Özer G., Güler K. A.
13. Uluslararası Metalurji ve Malzeme Kongresi, İstanbul, Türkiye, 9 - 11 Kasım 2006, ss.1760-1765 XXVII. D ö külebilir Kalıplarda Segregasyo nD ö külebilir Kalıplarda Segregasyo n
GÜLER K. A. , Çiğdem M.
12. Uluslararası Metalurji ve Malzeme Kongresi, 01 Ekim 2005
XXVIII. Seramik ve Kum Kalıp Pro sesleriyle Üretilen Ayakkabı Çekicinin Özelliklerinin KarşılaştırılmasıSeramik ve Kum Kalıp Pro sesleriyle Üretilen Ayakkabı Çekicinin Özelliklerinin Karşılaştırılması Taşlıçukur Z., Balaban C., Özer G., Güler K. A. , Kuşkonmaz N., Çiğdem M.
12. Uluslararası Metalurji-Malzeme Kongresi ve Fuarı, İstanbul, Türkiye, 28 Eylül - 02 Ekim 2005, ss.2102-2108
Ansiklopedide Bölümler Ansiklopedide Bölümler
I. L o st F o am Casting o f Metallic Parts and StructuresL o st F o am Casting o f Metallic Parts and Structures Güler K. A. , Acar S.
Elsevier Science, Oxford/Amsterdam , ss.1-14, 2020 II. Encyclo pedia o f Aluminum and Its allo ysEncyclo pedia o f Aluminum and Its allo ys
GÜLER K. A.
Crc Press Taylor & Francis Group, ss.1816-1821, 2018
III. Reference Mo dule in Materials Science and Materials EngineeringReference Mo dule in Materials Science and Materials Engineering GÜLER K. A. , Askeland D. R.
Elsevier Science, Oxford/Amsterdam , ss.1-5, 2015
Desteklenen Projeler Desteklenen Projeler
GÜLER K. A. , Kısasöz A. A. , Yükseköğretim Kurumları Destekli Proje, Alüminyum Matrisli TiB2 İnsutu Takviyeli Kompozitlerin Üretimi ve Karakterizasyonu, 2018 - 2019
KISASÖZ A., ACAR S., GECÜ R., KARAASLAN A., GÜLER K. A. , Yükseköğretim Kurumları Destekli Proje, Isıya Dayanıklı 2.4879 Alaşımının Yüksek Sıcaklık Uygulamalarındaki Özellik Değişimlerinin Belirlenmesi, 2017 - 2019
KARAASLAN A., ACAR S., GECÜ R., KISASÖZ A., GÜLER K. A. , Yükseköğretim Kurumları Destekli Proje, Geri Dönüştürülebilir Metal Takviyeler Kullanılarak Üretilen Alüminyum Matrisli Metal-Metal Kompozitlerin Aşınma Özelliklerinin Belirlenmesi, 2017 - 2019
KARAASLAN A., ACAR S., KISASÖZ A., GECÜ R., GÜLER K. A. , Yükseköğretim Kurumları Destekli Proje, Çift Fazlı Paslanmaz Çelikte Ferrit-Östenit Faz Dengesinin 475 °C Kırılganlığı Üzerindeki Etkisinin İncelenmesi, 2017 - 2019
GÜLER K. A. , KISASÖZ A., KARAASLAN A., Yükseköğretim Kurumları Destekli Proje, Alüminyum Alaşımları İçin Düşük Üst Isılı Dökümle Bağlantılı Yarı-Katı Dövme Yönteminin Araştırılması, 2015 - 2017
KISASÖZ A., GÜLER K. A. , KARAASLAN A., Desteklenmiş Diğer Projeler, Dubleks Paslanmaz Çeliklerde Oluşan sigma ve chi Fazlarının Etkilerinin Isıl Yöntemler ile Giderilmesi, 2012 - 2015
GÜLER K. A. , Desteklenmiş Diğer Projeler, Development of a New Moulding Technique for Titanium Alloys Castings, for Automotive and Biomechanical Applications, Uiversidade do Minho Portugal, 2005 - 2007
Bilimsel Hakemlikler Bilimsel Hakemlikler
JOURNAL OF MATERIALS SCIENCE, SCI Kapsamındaki Dergi, Aralık 2019 Metallurgical and Materials Transactions B, SCI Kapsamındaki Dergi, Mayıs 2019 Transactions of Nonferrous Metals Society of China, SCI Kapsamındaki Dergi, Mart 2019 Frontiers of Mechanical Engineering, Diğer İndekslerce Taranan Dergi, Mayıs 2017 Materials and Design/Makale incelemesi, SCI Kapsamındaki Dergi, Ağustos 2016 Materials and Design/Makale İncelemesi, SCI Kapsamındaki Dergi, Haziran 2015
Metallurgical and Materials Transactions B/Makale İncelemesi, SCI Kapsamındaki Dergi, Haziran 2015 Metallurgical and Materials Transactions B/Makale incelemesi, SCI Kapsamındaki Dergi, Mayıs 2015 MATERIALI IN TEHNOLOGIJE/Makale İncelemesi, SCI Kapsamındaki Dergi, Mart 2015
Metallurgical and Materials Transactions B/Makale incelemesi, SCI Kapsamındaki Dergi, Eylül 2014
Metallurgical and Materials Transactions B/Makale incelemesi, SCI Kapsamındaki Dergi, Ağustos 2014 Journal of Materials Processing Technology/Makale incelemesi, SCI Kapsamındaki Dergi, Temmuz 2014 Metallurgical and Materials Transactions B/Makale incelemesi, SCI Kapsamındaki Dergi, Haziran 2014 Materials Science and Engineering B/Makale incelemesi, SCI Kapsamındaki Dergi, Ağustos 2011 International Journal of Materials Research/Makale incelemesi, SCI Kapsamındaki Dergi, Haziran 2011 International Journal of Materials Research/Makale incelemesi, SCI Kapsamındaki Dergi, Nisan 2011
Atıflar Atıflar
Toplam Atıf Sayısı (WOS):73 h-indeksi (WOS):4