NOZBART BORE
Tüm
NOZBART FULL BALL VALVES
Ball valves are the products which are widely used in pool and industry applications. Since they are key products relating to the installation, it is of high importance to be careful and to take the below issues into consideration. Wrong choices create problems for the installation and user. Manufacture of all sizes of PVC and PP Valves constitutes one of the expertise areas of Plastik (Tum Plastics). It provides the quality needed by the consumer with high quality raw material, careful manufacture technique, experience in sales and services. Some of the opportunities to be brought by the use of new EDE type ball valves in your applications are as follows:
It enables free movement of the liquid. It is the type of valve where the armature flow resistance is the lowest.
Ball and tight joints are manufactured from high quality material with special manufacture techniques and high surface sensitivity. It ensures impermeability and easy opening and closing.
The use is simple. The thick pin and large pin table inside enables long life and easy turning under pressure.
You can disassemble any bolt pin of the assembled valve in closed position. The ball under pressure will not pop out.
The transition hole is at the value given at the standards according to the nominal measure of the valve and stated in mm. This value enables a smooth flow without turbulence.
Suitable for Joint (PVC), welded (PP), geared (PVC-PP) and Flanged joints. Joints are compliant with DIN 8063 (PVC) and DIN 16962 standards. Metal pipes can be used in geared and flanged applications.
Testing with 4,2xPN explosion pressure for one hour at 20 °C in accordance with the DIN 3441 standard.
All valves manufactured by TUM Plastik ve Makina Kalıp San. ve Tic. Ltd. Sti (Tum Plastics & Machinery Mould Industry & Trading Limited Company) are subjected to impermeability tested by one by. With floating ball bearing, the ball is put in the bearing only with tight joints. This decreases the friction strength to minimum. In closed position, the opening and closing pin is put in a bearing enabling movement in the flowing axis to the ball. The fluid pressure contributed to the impermeability by pushing the ball to the other side. There by impermeability is achieved.
It has a design which is not corrosive where the fluid does not contact any metal equipment for water, acid, base and various chemicals. Due to this property, it is preferred for many chemicals. It is a healthy product, in whose manufacture high quality material, which is suitable for human health are used.
Contracting the valve joint bolts excessively, does not squeeze the ball. With the gears having a saw profile, the bolts enable easy assembly and high resistance under pressure.
The valves are manufactured with the guarantee of the world brand in full bore nine different sizes with the state of the art technology.
YETKİLİ BAYİİ
AUTHORIZED DISTRIBUTOR
EDE TİPİ BİR TARAFI - İKİ TARAFI DİŞLİ KÜRESEL VANALARI (U-PVC) 10 BAR ACID
ASİT
EDE TYPE ONE SIDE - BOTH SIDES THREADED BALL VALVES (U-PVC) 10 BAR EDE TİPİ BİR TARAFI - İKİ TARAFI DİŞLİ KÜRESEL SU VANALARI (U-PVC) 10 BAR
EDE TYPE ONE SIDE - BOTH SIDES THREADED WATER BALL VALVES (U-PVC) 10 BAR
EDE TİPİ YAPIŞTIRMA KÜRESEL VANALARI (U-PVC) 10 BAR ACID
ASİT
EDE TYPE BALL VALVES (U-PVC) 10 BAR
U-P.V.C. Küresel Su Vanası U-P.V.C. Water Ball Valve Yapıştırma / Solvent Basınç / Pressure : Küre Contası / Seals : HDPE O-Ringler / O-Rings : EPDM
PN 10
U-P.V.C. Küresel Su Vanası U-P.V.C. Water Ball Valve Dişli / Female Thread Basınç / Pressure : Küre Contası / Seals : HDPE O-Ringler / O-Rings : EPDM
PN 10
U-P.V.C. Küresel Asit Vanası U-P.V.C. Acid Ball Valve Yapıştırma / Solvent Basınç / Pressure : PN 10 Küre Contası / Seals : TEFLON O-Ringler / O-Rings : EPDM
U-P.V.C. Küresel Asit Vanası U-P.V.C. Acid Ball Valve Dişli / Female Thread Basınç / Pressure : PN 10 Küre Contası / Seals : TEFLON O-Ringler / O-Rings : EPDM
a Standart ürünlerimizde kullandığımız EPDM o-ringler petrol, pertol türevleri ve organik yağlar için uygun değildir.
O-ringler değiştirilerek tüm akışkanlar için özel vanalar üretilir.
Standard valves with EPDM seal can not be used for petroleum, petroleum derivates and organic oils.
Special valves for all fluids are produced by changing the o-rings.
EDE TİPİ YAPIŞTIRMA KÜRESEL SU VANALARI (U-PVC) 10 BAR EDE TYPE WATER BALL VALVES (U-PVC) 10 BAR
a Standart ürünlerimizde kullandığımız EPDM o-ringler petrol, pertol türevleri ve organik yağlar için uygun değildir.
O-ringler değiştirilerek tüm akışkanlar için özel vanalar üretilir.
Standard valves with EPDM seal can not be used for petroleum, petroleum derivates and organic oils.
Special valves for all fluids are produced by changing the o-rings.
VPVC-110 VPVC-040
VPVC-090 VPVC-075 VPVC-063 VPVC-050 VPVC-020 VPVC-025 VPVC-032
METRİK - METRIC TSE / ISO / DIN
IMPERIAL
BS / ANSI / ASTM / AS / NZS
KOD CODE D
mm INCH
D
mm
KOD CODE
DN
mm
20 25 32 40 50 63 75 90 110
1/2'' 3/4'' 1'' 1 1/4'' 1 1/2'' 2'' 2 1/2''
3'' 4''
21,3 26,9 33,7 42,4 48,3 60,3 75,3 88,9
114,3 AVPVC-110 AVPVC-040
AVPVC-090 AVPVC-075 AVPVC-063 AVPVC-050 AVPVC-020 AVPVC-025 AVPVC-032
15 20 25 32 40 50 65 80 100
VPVC-111 VPVC-041
VPVC-091 VPVC-076 VPVC-064 VPVC-051 VPVC-021 VPVC-026 VPVC-033 METRİK - METRIC
TSE / ISO / DIN
IMPERIAL
BS / ANSI / ASTM / AS / NZS KOD
CODE
D
mm INCH
D
mm
KOD CODE
D
INCH
20 25 32 40 50 63 75 90 110
1/2'' 3/4'' 1'' 1 1/4'' 1 1/2'' 2'' 2 1/2''
3'' 4''
21,3 26,9 33,7 42,4 48,3 60,3 75,3 88,9
114,3 AVPVC-111 AVPVC-041
AVPVC-091 AVPVC-076 AVPVC-064 AVPVC-051 AVPVC-021 AVPVC-026 AVPVC-033
DN
mm
15 20 25 32 40 50 65 80 100 1/2''
3/4'' 1'' 1 1/4'' 1 1/2'' 2'' 2 1/2''
3''
4'' VPVC-112 VPVC-042
VPVC-092 VPVC-077 VPVC-065 VPVC-052 VPVC-022 VPVC-027 VPVC-034
KOD CODE BSP - NPT
İKİ TARAFI DİŞLİ DOUBLE SIDE THREADED BİR TARAFI DİŞLİ - ONE SIDE THREADED
VPVCA-110 VPVCA-040
VPVCA-090 VPVCA-075 VPVCA-063 VPVCA-050 VPVCA-020 VPVCA-025 VPVCA-032
METRİK - METRIC TSE / ISO / DIN
IMPERIAL
BS / ANSI / ASTM / AS / NZS
KOD CODE D
mm INCH
D
mm
KOD CODE
DN
mm
20 25 32 40 50 63 75 90 110
1/2'' 3/4'' 1'' 1 1/4'' 1 1/2'' 2'' 2 1/2''
3'' 4''
21,3 26,9 33,7 42,4 48,3 60,3 75,3 88,9
114,3 AVPVCA-110 AVPVCA-040
AVPVCA-090 AVPVCA-075 AVPVCA-063 AVPVCA-050 AVPVCA-020 AVPVCA-025 AVPVCA-032
15 20 25 32 40 50 65 80 100
VPVCA-111 VPVCA-041
VPVCA-091 VPVCA-076 VPVCA-064 VPVCA-051 VPVCA-021 VPVCA-026 VPVCA-033 METRİK - METRIC
TSE / ISO / DIN
IMPERIAL
BS / ANSI / ASTM / AS / NZS KOD
CODE
D
mm INCH
D
mm
KOD CODE
D
INCH
20 25 32 40 50 63 75 90 110
1/2'' 3/4'' 1'' 1 1/4'' 1 1/2'' 2'' 2 1/2''
3'' 4''
21,3 26,9 33,7 42,4 48,3 60,3 75,3 88,9
114,3 AVPVCA-111 AVPVCA-041
AVPVCA-091 AVPVCA-076 AVPVCA-064 AVPVCA-051 AVPVCA-021 AVPVCA-026 AVPVCA-033
DN
mm
15 20 25 32 40 50 65 80 100 1/2''
3/4'' 1'' 1 1/4'' 1 1/2'' 2'' 2 1/2''
3''
4'' VPVCA-112 VPVCA-042
VPVCA-092 VPVCA-077 VPVCA-065 VPVCA-052 VPVCA-022 VPVCA-027 VPVCA-034
KOD CODE BSP - NPT
İKİ TARAFI DİŞLİ DOUBLE SIDE THREADED BİR TARAFI DİŞLİ - ONE SIDE THREADED
EDE TİPİ BİR TARAFI - İKİ TARAFI DİŞLİ KÜRESEL VANALARI (U-PVC) 10 BAR ACID
ASİT
EDE TYPE ONE SIDE - BOTH SIDES THREADED BALL VALVES (U-PVC) 10 BAR EDE TİPİ BİR TARAFI - İKİ TARAFI DİŞLİ KÜRESEL SU VANALARI (U-PVC) 10 BAR
EDE TYPE ONE SIDE - BOTH SIDES THREADED WATER BALL VALVES (U-PVC) 10 BAR
EDE TİPİ YAPIŞTIRMA KÜRESEL VANALARI (U-PVC) 10 BAR ACID
ASİT
EDE TYPE BALL VALVES (U-PVC) 10 BAR
U-P.V.C. Küresel Su Vanası U-P.V.C. Water Ball Valve Yapıştırma / Solvent Basınç / Pressure : Küre Contası / Seals : HDPE O-Ringler / O-Rings : EPDM
PN 10
U-P.V.C. Küresel Su Vanası U-P.V.C. Water Ball Valve Dişli / Female Thread Basınç / Pressure : Küre Contası / Seals : HDPE O-Ringler / O-Rings : EPDM
PN 10
U-P.V.C. Küresel Asit Vanası U-P.V.C. Acid Ball Valve Yapıştırma / Solvent Basınç / Pressure : PN 10 Küre Contası / Seals : TEFLON O-Ringler / O-Rings : EPDM
U-P.V.C. Küresel Asit Vanası U-P.V.C. Acid Ball Valve Dişli / Female Thread Basınç / Pressure : PN 10 Küre Contası / Seals : TEFLON O-Ringler / O-Rings : EPDM
a Standart ürünlerimizde kullandığımız EPDM o-ringler petrol, pertol türevleri ve organik yağlar için uygun değildir.
O-ringler değiştirilerek tüm akışkanlar için özel vanalar üretilir.
Standard valves with EPDM seal can not be used for petroleum, petroleum derivates and organic oils.
Special valves for all fluids are produced by changing the o-rings.
EDE TİPİ YAPIŞTIRMA KÜRESEL SU VANALARI (U-PVC) 10 BAR EDE TYPE WATER BALL VALVES (U-PVC) 10 BAR
a Standart ürünlerimizde kullandığımız EPDM o-ringler petrol, pertol türevleri ve organik yağlar için uygun değildir.
O-ringler değiştirilerek tüm akışkanlar için özel vanalar üretilir.
Standard valves with EPDM seal can not be used for petroleum, petroleum derivates and organic oils.
Special valves for all fluids are produced by changing the o-rings.
VPVC-110 VPVC-040
VPVC-090 VPVC-075 VPVC-063 VPVC-050 VPVC-020 VPVC-025 VPVC-032
METRİK - METRIC TSE / ISO / DIN
IMPERIAL
BS / ANSI / ASTM / AS / NZS
KOD CODE D
mm INCH
D
mm
KOD CODE
DN
mm
20 25 32 40 50 63 75 90 110
1/2'' 3/4'' 1'' 1 1/4'' 1 1/2'' 2'' 2 1/2''
3'' 4''
21,3 26,9 33,7 42,4 48,3 60,3 75,3 88,9
114,3 AVPVC-110 AVPVC-040
AVPVC-090 AVPVC-075 AVPVC-063 AVPVC-050 AVPVC-020 AVPVC-025 AVPVC-032
15 20 25 32 40 50 65 80 100
VPVC-111 VPVC-041
VPVC-091 VPVC-076 VPVC-064 VPVC-051 VPVC-021 VPVC-026 VPVC-033 METRİK - METRIC
TSE / ISO / DIN
IMPERIAL
BS / ANSI / ASTM / AS / NZS KOD
CODE
D
mm INCH
D
mm
KOD CODE
D
INCH
20 25 32 40 50 63 75 90 110
1/2'' 3/4'' 1'' 1 1/4'' 1 1/2'' 2'' 2 1/2''
3'' 4''
21,3 26,9 33,7 42,4 48,3 60,3 75,3 88,9
114,3 AVPVC-111 AVPVC-041
AVPVC-091 AVPVC-076 AVPVC-064 AVPVC-051 AVPVC-021 AVPVC-026 AVPVC-033
DN
mm
15 20 25 32 40 50 65 80 100 1/2''
3/4'' 1'' 1 1/4'' 1 1/2'' 2'' 2 1/2''
3''
4'' VPVC-112 VPVC-042
VPVC-092 VPVC-077 VPVC-065 VPVC-052 VPVC-022 VPVC-027 VPVC-034
KOD CODE BSP - NPT
İKİ TARAFI DİŞLİ DOUBLE SIDE THREADED BİR TARAFI DİŞLİ - ONE SIDE THREADED
VPVCA-110 VPVCA-040
VPVCA-090 VPVCA-075 VPVCA-063 VPVCA-050 VPVCA-020 VPVCA-025 VPVCA-032
METRİK - METRIC TSE / ISO / DIN
IMPERIAL
BS / ANSI / ASTM / AS / NZS
KOD CODE D
mm INCH
D
mm
KOD CODE
DN
mm
20 25 32 40 50 63 75 90 110
1/2'' 3/4'' 1'' 1 1/4'' 1 1/2'' 2'' 2 1/2''
3'' 4''
21,3 26,9 33,7 42,4 48,3 60,3 75,3 88,9
114,3 AVPVCA-110 AVPVCA-040
AVPVCA-090 AVPVCA-075 AVPVCA-063 AVPVCA-050 AVPVCA-020 AVPVCA-025 AVPVCA-032
15 20 25 32 40 50 65 80 100
VPVCA-111 VPVCA-041
VPVCA-091 VPVCA-076 VPVCA-064 VPVCA-051 VPVCA-021 VPVCA-026 VPVCA-033 METRİK - METRIC
TSE / ISO / DIN
IMPERIAL
BS / ANSI / ASTM / AS / NZS KOD
CODE
D
mm INCH
D
mm
KOD CODE
D
INCH
20 25 32 40 50 63 75 90 110
1/2'' 3/4'' 1'' 1 1/4'' 1 1/2'' 2'' 2 1/2''
3'' 4''
21,3 26,9 33,7 42,4 48,3 60,3 75,3 88,9
114,3 AVPVCA-111 AVPVCA-041
AVPVCA-091 AVPVCA-076 AVPVCA-064 AVPVCA-051 AVPVCA-021 AVPVCA-026 AVPVCA-033
DN
mm
15 20 25 32 40 50 65 80 100 1/2''
3/4'' 1'' 1 1/4'' 1 1/2'' 2'' 2 1/2''
3''
4'' VPVCA-112 VPVCA-042
VPVCA-092 VPVCA-077 VPVCA-065 VPVCA-052 VPVCA-022 VPVCA-027 VPVCA-034
KOD CODE BSP - NPT
İKİ TARAFI DİŞLİ DOUBLE SIDE THREADED BİR TARAFI DİŞLİ - ONE SIDE THREADED
YENİ MODEL EDE TİPİ FLANŞLI KÜRESEL VANALARI (U-PVC) 10 BAR ACID
ASİT
NEW MODEL EDE TYPE BALL VALVES WITH FLANGE (U-PVC) 10 BAR YENİ MODEL EDE TİPİ FLANŞLI KÜRESEL SU VANALARI (U-PVC) 10 BAR NEW MODEL EDE TYPE WATER BALL VALVES WITH FLANGE (U-PVC) 10 BAR
4 4 4 4 4 4 4 4 4 4
Her biri tek tek test edilmiştir.
Tested one by one.
20 mm (1/2”) - 110 mm (4”) tam geçişli tüm ebatlarda Metrik ve İngiliz standardında.
Sizes from 20 mm to 110 mm (1/2 ”- 4”) Metric and British standard series.
Özel dizaynı ile tüm ebatlarda U-P.V.C için PN 10
Body exclusive design that allows the valve to support pressures up to 10bars for U-P.V.C Özel dizaynı ile düşük basınç kaybı ve rahat kontrol imkanı.
New ball valve design ensuring low operating torque and low pressure loss.
Tamamıyla termoplastik malzemeden mamul, korozyonsuz sağlıklı çalışma.
Made of thermoplastic material, work without any corrosion Ortam koşullarına, kimyasal ve mekanik etkilere üstün dayanım.
Excellent mechanical and environmental strength.
Endüstriyel uygulamalar, arıtma sistemleri ve yüzme havuzları için ideal.
Ideally suited for industrial, water treatment or water distribution applications.
EPDM oringler ve asit için özel teflon küre contası.
Seals available in Teflon for acid and O-Rings available in EPDM.
Kendinden iki tarafı rakorlu özel dizaynı ile kolay montaj ve demontaj kolaylığı.
Union ends for easy installation and removal.
Vana kapalı pozisyonda basınç altında iken somun sökülebilir, küre yerinden çıkmaz.
Threaded seal carrier. It allows the disassembling of the valve while maintaining system pressure.
ÖLÇÜ TABLOSU DIMENSIONS
D
mm BSP DN mm
H mm
L1 mm
Z mm
F mm
L mm 20 1/2" 15 48 45 51 16 83 25 3/4" 20 55 51 57 19 95
32 1" 25 65 55 61 22 105
40 1 ¼" 32 76 64 70 26 122 50 1 ½" 40 87 75 81 31 143 63 2" 50 101 85 91 38 167 75 2 ½" 65 113 108 114 44 202 90 3" 80 144 134 144 51 246 110 4" 100 157 152 162 61 284
Inch-based series Metric
series
U-P.V.C. Küresel Asit Vanası U-P.V.C. Acid Ball Valve Basınç / Pressure : PN 10 Küre Contası / Seals : TEFLON O-Ringler / O-Rings : EPDM
U-P.V.C. Küresel Su Vanası U-P.V.C. Water Ball Valve Basınç / Pressure : Küre Contası / Seals : HDPE O-Ringler / O-Rings : EPDM
PN 10
U-P.V.C. Küresel Asit Vanası
U-PVC Water Acid ValveBasınç / Pressure : PN 10 Küre Contası / Seals : TEFLON O-Ringler / O-Rings : EPDM U-P.V.C. Küresel Su Vanası
U-PVC Water Ball Valve
Basınç / : PN 10 Küre Contası / Seals : HDPE O-Ringler / O-Rings : EPDM
Pressure
0 20 40 60
2 6 4 8 10 14 16
12
Sıcaklık - (Temperature) °C
Basınç - (Pressure) Bar
U.P.V.C. Küresel Vana
U.P.V.C. Ball Valve
PN 10 U-P.V.C KÜRESEL VANALAR iÇiN AKIŞKAN SICAKLIĞINA BAĞLI KULLANIM BASINCI DİYAGRAMI
TEMPERATURE - PRESSURE DIAGRAM FOR U-P.V.C BALL VALVES
H
L1 Z F
DN
L
a Standart ürünlerimizde kullandığımız EPDM o-ringler petrol, pertol türevleri ve organik yağlar için uygun değildir.
O-ringler değiştirilerek tüm akışkanlar için özel vanalar üretilir.
Standard valves with EPDM seal can not be used for petroleum, petroleum derivates and organic oils.
Special valves for all fluids are produced by changing the o-rings.
VKF-110 VKF-040
VKF-090 VKF-075 VKF-063 VKF-050 VKF-020 VKF-025 VKF-032
METRİK - METRIC TSE / ISO / DIN
IMPERIAL
BS / ANSI / ASTM / AS / NZS
KOD CODE D
mm INCH
D
mm
KOD CODE
DN
mm
20 25 32 40 50 63 75 90 110
1/2'' 3/4'' 1'' 1 1/4'' 1 1/2'' 2'' 2 1/2''
3'' 4''
21,3 26,9 33,7 42,4 48,3 60,3 75,3 88,9
114,3 AVKF-110 AVKF-040
AVKF-090 AVKF-075 AVKF-063 AVKF-050 AVKF-020 AVKF-025 AVKF-032
15 20 25 32 40 50 65 80 100
VKFA-110 VKFA-040
VKFA-090 VKFA-075 VKFA-063 VKFA-050 VKFA-020 VKFA-025 VKFA-032
METRİK - METRIC TSE / ISO / DIN
IMPERIAL
BS / ANSI / ASTM / AS / NZS
KOD CODE D
mm INCH
D
mm
KOD CODE
DN
mm
20 25 32 40 50 63 75 90 110
1/2'' 3/4'' 1'' 1 1/4'' 1 1/2'' 2'' 2 1/2''
3'' 4''
21,3 26,9 33,7 42,4 48,3 60,3 75,3 88,9
114,3 AVKFA-110 AVKFA-040
AVKFA-090 AVKFA-075 AVKFA-063 AVKFA-050 AVKFA-020 AVKFA-025 AVKFA-032
15 20 25 32 40 50 65 80 100
YENİ MODEL EDE TİPİ FLANŞLI KÜRESEL VANALARI (U-PVC) 10 BAR ACID
ASİT
NEW MODEL EDE TYPE BALL VALVES WITH FLANGE (U-PVC) 10 BAR YENİ MODEL EDE TİPİ FLANŞLI KÜRESEL SU VANALARI (U-PVC) 10 BAR NEW MODEL EDE TYPE WATER BALL VALVES WITH FLANGE (U-PVC) 10 BAR
4 4 4 4 4 4 4 4 4 4
Her biri tek tek test edilmiştir.
Tested one by one.
20 mm (1/2”) - 110 mm (4”) tam geçişli tüm ebatlarda Metrik ve İngiliz standardında.
Sizes from 20 mm to 110 mm (1/2 ”- 4”) Metric and British standard series.
Özel dizaynı ile tüm ebatlarda U-P.V.C için PN 10
Body exclusive design that allows the valve to support pressures up to 10bars for U-P.V.C Özel dizaynı ile düşük basınç kaybı ve rahat kontrol imkanı.
New ball valve design ensuring low operating torque and low pressure loss.
Tamamıyla termoplastik malzemeden mamul, korozyonsuz sağlıklı çalışma.
Made of thermoplastic material, work without any corrosion Ortam koşullarına, kimyasal ve mekanik etkilere üstün dayanım.
Excellent mechanical and environmental strength.
Endüstriyel uygulamalar, arıtma sistemleri ve yüzme havuzları için ideal.
Ideally suited for industrial, water treatment or water distribution applications.
EPDM oringler ve asit için özel teflon küre contası.
Seals available in Teflon for acid and O-Rings available in EPDM.
Kendinden iki tarafı rakorlu özel dizaynı ile kolay montaj ve demontaj kolaylığı.
Union ends for easy installation and removal.
Vana kapalı pozisyonda basınç altında iken somun sökülebilir, küre yerinden çıkmaz.
Threaded seal carrier. It allows the disassembling of the valve while maintaining system pressure.
ÖLÇÜ TABLOSU DIMENSIONS
D
mm BSP DN mm
H mm
L1 mm
Z mm
F mm
L mm 20 1/2" 15 48 45 51 16 83 25 3/4" 20 55 51 57 19 95
32 1" 25 65 55 61 22 105
40 1 ¼" 32 76 64 70 26 122 50 1 ½" 40 87 75 81 31 143 63 2" 50 101 85 91 38 167 75 2 ½" 65 113 108 114 44 202 90 3" 80 144 134 144 51 246 110 4" 100 157 152 162 61 284
Inch-based series Metric
series
U-P.V.C. Küresel Asit Vanası U-P.V.C. Acid Ball Valve Basınç / Pressure : PN 10 Küre Contası / Seals : TEFLON O-Ringler / O-Rings : EPDM
U-P.V.C. Küresel Su Vanası U-P.V.C. Water Ball Valve Basınç / Pressure : Küre Contası / Seals : HDPE O-Ringler / O-Rings : EPDM
PN 10
U-P.V.C. Küresel Asit Vanası
U-PVC Water Acid ValveBasınç / Pressure : PN 10 Küre Contası / Seals : TEFLON O-Ringler / O-Rings : EPDM U-P.V.C. Küresel Su Vanası
U-PVC Water Ball Valve
Basınç / : PN 10 Küre Contası / Seals : HDPE O-Ringler / O-Rings : EPDM
Pressure
0 20 40 60
2 6 4 8 10 14 16
12
Sıcaklık - (Temperature) °C
Basınç - (Pressure) Bar
U.P.V.C. Küresel Vana
U.P.V.C. Ball Valve
PN 10 U-P.V.C KÜRESEL VANALAR iÇiN AKIŞKAN SICAKLIĞINA BAĞLI KULLANIM BASINCI DİYAGRAMI
TEMPERATURE - PRESSURE DIAGRAM FOR U-P.V.C BALL VALVES
H
L1 Z F
DN
L
a Standart ürünlerimizde kullandığımız EPDM o-ringler petrol, pertol türevleri ve organik yağlar için uygun değildir.
O-ringler değiştirilerek tüm akışkanlar için özel vanalar üretilir.
Standard valves with EPDM seal can not be used for petroleum, petroleum derivates and organic oils.
Special valves for all fluids are produced by changing the o-rings.
VKF-110 VKF-040
VKF-090 VKF-075 VKF-063 VKF-050 VKF-020 VKF-025 VKF-032
METRİK - METRIC TSE / ISO / DIN
IMPERIAL
BS / ANSI / ASTM / AS / NZS
KOD CODE D
mm INCH
D
mm
KOD CODE
DN
mm
20 25 32 40 50 63 75 90 110
1/2'' 3/4'' 1'' 1 1/4'' 1 1/2'' 2'' 2 1/2''
3'' 4''
21,3 26,9 33,7 42,4 48,3 60,3 75,3 88,9
114,3 AVKF-110 AVKF-040
AVKF-090 AVKF-075 AVKF-063 AVKF-050 AVKF-020 AVKF-025 AVKF-032
15 20 25 32 40 50 65 80 100
VKFA-110 VKFA-040
VKFA-090 VKFA-075 VKFA-063 VKFA-050 VKFA-020 VKFA-025 VKFA-032
METRİK - METRIC TSE / ISO / DIN
IMPERIAL
BS / ANSI / ASTM / AS / NZS
KOD CODE D
mm INCH
D
mm
KOD CODE
DN
mm
20 25 32 40 50 63 75 90 110
1/2'' 3/4'' 1'' 1 1/4'' 1 1/2'' 2'' 2 1/2''
3'' 4''
21,3 26,9 33,7 42,4 48,3 60,3 75,3 88,9
114,3 AVKFA-110 AVKFA-040
AVKFA-090 AVKFA-075 AVKFA-063 AVKFA-050 AVKFA-020 AVKFA-025 AVKFA-032
15 20 25 32 40 50 65 80 100
PNÖMATİK AKTÜATÖRLÜ EDE TİPİ BİR TARAFI - İKİ TARAFI DİŞLİ KÜRESEL SU VANALARI (U-PVC) 10 BAR PNEUMATIC ACTUATION EDE TYPE ONE SIDE - BOTH SIDES THREADED WATER BALL VALVES (U-PVC) 10 BAR
PNÖMATİK AKTÜATÖRLÜ EDE TİPİ YAPIŞTIRMA KÜRESEL SU VANALARI (U-PVC) 10 BAR PNEUMATIC ACTUATION EDE TYPE WATER BALL VALVES (U-PVC) 10 BAR
U-P.V.C. Küresel Su Vanası U-P.V.C. Water Ball Valve Dişli / Female Thread Basınç / Pressure : Küre Contası / Seals : HDPE O-Ringler / O-Rings : EPDM
PN 10 U-P.V.C. Küresel Su Vanası U-P.V.C. Water Ball Valve Yapıştırma / Solvent Basınç / Pressure : Küre Contası / Seals : HDPE O-Ringler / O-Rings : EPDM
PN 10
*
*
* Redüksiyonlu / Reduction
a Standart ürünlerimizde kullandığımız EPDM o-ringler petrol, pertol türevleri ve organik yağlar için uygun değildir.
O-ringler değiştirilerek tüm akışkanlar için özel vanalar üretilir.
Standard valves with EPDM seal can not be used for petroleum, petroleum derivates and organic oils.
Special valves for all fluids are produced by changing the o-rings.
VPVCP-110 VPVCP-040
VPVCP-090 VPVCP-075 VPVCP-063 VPVCP-050 VPVCP-020 VPVCP-025 VPVCP-032
METRİK - METRIC TSE / ISO / DIN
IMPERIAL
BS / ANSI / ASTM / AS / NZS
KOD CODE D
mm INCH
D
mm
KOD CODE
DN
mm 20
25 32 40 50 63 75 90 110
1/2'' 3/4'' 1'' 1 1/4'' 1 1/2'' 2'' 2 1/2''
3'' 4''
21,3 26,9 33,7 42,4 48,3 60,3 75,3 88,9
114,3 AVPVCP-110 AVPVCP-040
AVPVCP-090 AVPVCP-075 AVPVCP-063 AVPVCP-050 AVPVCP-020 AVPVCP-025 AVPVCP-032
15 20 25 32 40 50 65 80 100 ÇİFT ETKİLİ
DOUBLE ACTING
* *
VPVCP-111 VPVCP-041
VPVCP-091 VPVCP-076 VPVCP-064 VPVCP-051 VPVCP-021 VPVCP-026 VPVCP-033 METRİK - METRIC
TSE / ISO / DIN
IMPERIAL
BS / ANSI / ASTM / AS / NZS KOD
CODE
D
mm INCH
D
mm
KOD CODE
D
INCH
20 25 32 40 50 63 75 90 110
1/2'' 3/4'' 1'' 1 1/4'' 1 1/2'' 2'' 2 1/2''
3'' 4''
21,3 26,9 33,7 42,4 48,3 60,3 75,3 88,9
114,3 AVPVCP-111 AVPVCP-041
AVPVCP-091 AVPVCP-076 AVPVCP-064 AVPVCP-051 AVPVCP-021 AVPVCP-026 AVPVCP-033
DN
mm
15 20 25 32 40 50 65 80 100 1/2''
3/4'' 1'' 1 1/4'' 1 1/2'' 2'' 2 1/2''
3''
4'' VPVCP-112 VPVCP-042
VPVCP-092 VPVCP-077 VPVCP-065 VPVCP-052 VPVCP-022 VPVCP-027 VPVCP-034
KOD CODE BSP - NPT
İKİ TARAFI DİŞLİ DOUBLE SIDE THREADED BİR TARAFI DİŞLİ - ONE SIDE THREADED
ÇİFT ETKİLİ - DOUBLE ACTING
PNÖMATİK AKTÜATÖRLÜ EDE TİPİ BİR TARAFI - İKİ TARAFI DİŞLİ KÜRESEL SU VANALARI (U-PVC) 10 BAR PNEUMATIC ACTUATION EDE TYPE ONE SIDE - BOTH SIDES THREADED WATER BALL VALVES (U-PVC) 10 BAR
PNÖMATİK AKTÜATÖRLÜ EDE TİPİ YAPIŞTIRMA KÜRESEL SU VANALARI (U-PVC) 10 BAR PNEUMATIC ACTUATION EDE TYPE WATER BALL VALVES (U-PVC) 10 BAR
U-P.V.C. Küresel Su Vanası U-P.V.C. Water Ball Valve Dişli / Female Thread Basınç / Pressure : Küre Contası / Seals : HDPE O-Ringler / O-Rings : EPDM
PN 10 U-P.V.C. Küresel Su Vanası U-P.V.C. Water Ball Valve Yapıştırma / Solvent Basınç / Pressure : Küre Contası / Seals : HDPE O-Ringler / O-Rings : EPDM
PN 10
*
*
* Redüksiyonlu / Reduction
a Standart ürünlerimizde kullandığımız EPDM o-ringler petrol, pertol türevleri ve organik yağlar için uygun değildir.
O-ringler değiştirilerek tüm akışkanlar için özel vanalar üretilir.
Standard valves with EPDM seal can not be used for petroleum, petroleum derivates and organic oils.
Special valves for all fluids are produced by changing the o-rings.
VPVCP-113 VPVCP-043
VPVCP-093 VPVCP-078 VPVCP-066 VPVCP-053 VPVCP-023 VPVCP-028 VPVCP-035
METRİK - METRIC TSE / ISO / DIN
IMPERIAL
BS / ANSI / ASTM / AS / NZS
KOD CODE D
mm INCH
D
mm
KOD CODE
DN
mm 20
25 32 40 50 63 75 90 110
1/2'' 3/4'' 1'' 1 1/4'' 1 1/2'' 2'' 2 1/2''
3'' 4''
21,3 26,9 33,7 42,4 48,3 60,3 75,3 88,9
114,3 AVPVCP-113 AVPVCP-043
AVPVCP-093 AVPVCP-078 AVPVCP-066 AVPVCP-053 AVPVCP-023 AVPVCP-028 AVPVCP-035
15 20 25 32 40 50 65 80 100 TEK ETKİLİ
SINGLE ACTING
* *
VPVCP-114 VPVCP-044
VPVCP-094 VPVCP-079 VPVCP-067 VPVCP-054 VPVCP-024 VPVCP-029 VPVCP-036 METRİK - METRIC
TSE / ISO / DIN
IMPERIAL
BS / ANSI / ASTM / AS / NZS KOD
CODE
D
mm INCH
D
mm
KOD CODE
D
INCH
20 25 32 40 50 63 75 90 110
1/2'' 3/4'' 1'' 1 1/4'' 1 1/2'' 2'' 2 1/2''
3'' 4''
21,3 26,9 33,7 42,4 48,3 60,3 75,3 88,9
114,3 AVPVCP-114 AVPVCP-044
AVPVCP-094 AVPVCP-079 AVPVCP-067 AVPVCP-054 AVPVCP-024 AVPVCP-029 AVPVCP-036
DN
mm
15 20 25 32 40 50 65 80 100 1/2''
3/4'' 1'' 1 1/4'' 1 1/2'' 2'' 2 1/2''
3''
4'' VPVCP-115 VPVCP-045
VPVCP-095 VPVCP-080 VPVCP-068 VPVCP-055 VPVCP-025 VPVCP-030 VPVCP-037
KOD CODE BSP - NPT
İKİ TARAFI DİŞLİ DOUBLE SIDE THREADED BİR TARAFI DİŞLİ - ONE SIDE THREADED
TEK ETKİLİ - SINGLE ACTING
* Redüksiyonlu / Reduction * Redüksiyonlu / Reduction
PNÖMATİK AKTÜATÖRLÜ EDE TİPİ BİR TARAFI - İKİ TARAFI DİŞLİ KÜRESEL SU VANALARI (U-PVC) 10 BAR PNEUMATIC ACTUATION EDE TYPE ONE SIDE - BOTH SIDES THREADED WATER BALL VALVES (U-PVC) 10 BAR
PNÖMATİK AKTÜATÖRLÜ EDE TİPİ YAPIŞTIRMA KÜRESEL SU VANALARI (U-PVC) 10 BAR PNEUMATIC ACTUATION EDE TYPE WATER BALL VALVES (U-PVC) 10 BAR
U-P.V.C. Küresel Su Vanası U-P.V.C. Water Ball Valve Dişli / Female Thread Basınç / Pressure : Küre Contası / Seals : HDPE O-Ringler / O-Rings : EPDM
PN 10 U-P.V.C. Küresel Su Vanası U-P.V.C. Water Ball Valve Yapıştırma / Solvent Basınç / Pressure : Küre Contası / Seals : HDPE O-Ringler / O-Rings : EPDM
PN 10
*
*
* Redüksiyonlu / Reduction
a Standart ürünlerimizde kullandığımız EPDM o-ringler petrol, pertol türevleri ve organik yağlar için uygun değildir.
O-ringler değiştirilerek tüm akışkanlar için özel vanalar üretilir.
Standard valves with EPDM seal can not be used for petroleum, petroleum derivates and organic oils.
Special valves for all fluids are produced by changing the o-rings.
VPVCP-110 VPVCP-040
VPVCP-090 VPVCP-075 VPVCP-063 VPVCP-050 VPVCP-020 VPVCP-025 VPVCP-032
METRİK - METRIC TSE / ISO / DIN
IMPERIAL
BS / ANSI / ASTM / AS / NZS
KOD CODE D
mm INCH
D
mm
KOD CODE
DN
mm 20
25 32 40 50 63 75 90 110
1/2'' 3/4'' 1'' 1 1/4'' 1 1/2'' 2'' 2 1/2''
3'' 4''
21,3 26,9 33,7 42,4 48,3 60,3 75,3 88,9
114,3 AVPVCP-110 AVPVCP-040
AVPVCP-090 AVPVCP-075 AVPVCP-063 AVPVCP-050 AVPVCP-020 AVPVCP-025 AVPVCP-032
15 20 25 32 40 50 65 80 100 ÇİFT ETKİLİ
DOUBLE ACTING
* *
VPVCP-111 VPVCP-041
VPVCP-091 VPVCP-076 VPVCP-064 VPVCP-051 VPVCP-021 VPVCP-026 VPVCP-033 METRİK - METRIC
TSE / ISO / DIN
IMPERIAL
BS / ANSI / ASTM / AS / NZS KOD
CODE
D
mm INCH
D
mm
KOD CODE
D
INCH
20 25 32 40 50 63 75 90 110
1/2'' 3/4'' 1'' 1 1/4'' 1 1/2'' 2'' 2 1/2''
3'' 4''
21,3 26,9 33,7 42,4 48,3 60,3 75,3 88,9
114,3 AVPVCP-111 AVPVCP-041
AVPVCP-091 AVPVCP-076 AVPVCP-064 AVPVCP-051 AVPVCP-021 AVPVCP-026 AVPVCP-033
DN
mm
15 20 25 32 40 50 65 80 100 1/2''
3/4'' 1'' 1 1/4'' 1 1/2'' 2'' 2 1/2''
3''
4'' VPVCP-112 VPVCP-042
VPVCP-092 VPVCP-077 VPVCP-065 VPVCP-052 VPVCP-022 VPVCP-027 VPVCP-034
KOD CODE BSP - NPT
İKİ TARAFI DİŞLİ DOUBLE SIDE THREADED BİR TARAFI DİŞLİ - ONE SIDE THREADED
ÇİFT ETKİLİ - DOUBLE ACTING
PNÖMATİK AKTÜATÖRLÜ EDE TİPİ BİR TARAFI - İKİ TARAFI DİŞLİ KÜRESEL SU VANALARI (U-PVC) 10 BAR PNEUMATIC ACTUATION EDE TYPE ONE SIDE - BOTH SIDES THREADED WATER BALL VALVES (U-PVC) 10 BAR
PNÖMATİK AKTÜATÖRLÜ EDE TİPİ YAPIŞTIRMA KÜRESEL SU VANALARI (U-PVC) 10 BAR PNEUMATIC ACTUATION EDE TYPE WATER BALL VALVES (U-PVC) 10 BAR
U-P.V.C. Küresel Su Vanası U-P.V.C. Water Ball Valve Dişli / Female Thread Basınç / Pressure : Küre Contası / Seals : HDPE O-Ringler / O-Rings : EPDM
PN 10 U-P.V.C. Küresel Su Vanası U-P.V.C. Water Ball Valve Yapıştırma / Solvent Basınç / Pressure : Küre Contası / Seals : HDPE O-Ringler / O-Rings : EPDM
PN 10
*
*
* Redüksiyonlu / Reduction
a Standart ürünlerimizde kullandığımız EPDM o-ringler petrol, pertol türevleri ve organik yağlar için uygun değildir.
O-ringler değiştirilerek tüm akışkanlar için özel vanalar üretilir.
Standard valves with EPDM seal can not be used for petroleum, petroleum derivates and organic oils.
Special valves for all fluids are produced by changing the o-rings.
VPVCP-113 VPVCP-043
VPVCP-093 VPVCP-078 VPVCP-066 VPVCP-053 VPVCP-023 VPVCP-028 VPVCP-035
METRİK - METRIC TSE / ISO / DIN
IMPERIAL
BS / ANSI / ASTM / AS / NZS
KOD CODE D
mm INCH
D
mm
KOD CODE
DN
mm 20
25 32 40 50 63 75 90 110
1/2'' 3/4'' 1'' 1 1/4'' 1 1/2'' 2'' 2 1/2''
3'' 4''
21,3 26,9 33,7 42,4 48,3 60,3 75,3 88,9
114,3 AVPVCP-113 AVPVCP-043
AVPVCP-093 AVPVCP-078 AVPVCP-066 AVPVCP-053 AVPVCP-023 AVPVCP-028 AVPVCP-035
15 20 25 32 40 50 65 80 100 TEK ETKİLİ
SINGLE ACTING
* *
VPVCP-114 VPVCP-044
VPVCP-094 VPVCP-079 VPVCP-067 VPVCP-054 VPVCP-024 VPVCP-029 VPVCP-036 METRİK - METRIC
TSE / ISO / DIN
IMPERIAL
BS / ANSI / ASTM / AS / NZS KOD
CODE
D
mm INCH
D
mm
KOD CODE
D
INCH
20 25 32 40 50 63 75 90 110
1/2'' 3/4'' 1'' 1 1/4'' 1 1/2'' 2'' 2 1/2''
3'' 4''
21,3 26,9 33,7 42,4 48,3 60,3 75,3 88,9
114,3 AVPVCP-114 AVPVCP-044
AVPVCP-094 AVPVCP-079 AVPVCP-067 AVPVCP-054 AVPVCP-024 AVPVCP-029 AVPVCP-036
DN
mm
15 20 25 32 40 50 65 80 100 1/2''
3/4'' 1'' 1 1/4'' 1 1/2'' 2'' 2 1/2''
3''
4'' VPVCP-115 VPVCP-045
VPVCP-095 VPVCP-080 VPVCP-068 VPVCP-055 VPVCP-025 VPVCP-030 VPVCP-037
KOD CODE BSP - NPT
İKİ TARAFI DİŞLİ DOUBLE SIDE THREADED BİR TARAFI DİŞLİ - ONE SIDE THREADED
TEK ETKİLİ - SINGLE ACTING
* Redüksiyonlu / Reduction * Redüksiyonlu / Reduction
PNÖMATİK AKTÜATÖRLÜ EDE TİPİ BİR TARAFI - İKİ TARAFI DİŞLİ KÜRESEL VANALARI (U-PVC) 10 BAR ACID
ASİT
PNEUMATIC ACTUATION EDE TYPE ONE SIDE - BOTH SIDES THREADED BALL VALVES (U-PVC) 10 BAR PNÖMATİK AKTÜATÖRLÜ EDE TİPİ YAPIŞTIRMA KÜRESEL VANALARI (U-PVC) 10 BAR
ACID
ASİT
PNEUMATIC ACTUATION EDE TYPE BALL VALVES (U-PVC) 10 BAR
U-P.V.C. Küresel Asit Vanası U-P.V.C. Acid Ball Valve Yapıştırma / Solvent Basınç / Pressure : PN 10 Küre Contası / Seals : TEFLON O-Ringler / O-Rings : EPDM
U-P.V.C. Küresel Asit Vanası U-P.V.C. Acid Ball Valve Dişli / Female Thread Basınç / Pressure : PN 10 Küre Contası / Seals : TEFLON O-Ringler / O-Rings : EPDM
a Standart ürünlerimizde kullandığımız EPDM o-ringler petrol, pertol türevleri ve organik yağlar için uygun değildir.
O-ringler değiştirilerek tüm akışkanlar için özel vanalar üretilir.
Standard valves with EPDM seal can not be used for petroleum, petroleum derivates and organic oils.
Special valves for all fluids are produced by changing the o-rings.
PNÖMATİK AKTÜATÖRLÜ EDE TİPİ BİR TARAFI - İKİ TARAFI DİŞLİ KÜRESEL SU VANALARI (U-PVC) 10 BAR PNEUMATIC ACTUATION EDE TYPE ONE SIDE - BOTH SIDES THREADED WATER BALL VALVES (U-PVC) 10 BAR
a Standart ürünlerimizde kullandığımız EPDM o-ringler petrol, pertol türevleri ve organik yağlar için uygun değildir.
O-ringler değiştirilerek tüm akışkanlar için özel vanalar üretilir.
Standard valves with EPDM seal can not be used for petroleum, petroleum derivates and organic oils.
Special valves for all fluids are produced by changing the o-rings.
*
*
* Redüksiyonlu / Reduction VPVCAP-110 VPVCAP-040
VPVCAP-090 VPVCAP-075 VPVCAP-063 VPVCAP-050 VPVCAP-020 VPVCAP-025 VPVCAP-032
METRİK - METRIC TSE / ISO / DIN
IMPERIAL
BS / ANSI / ASTM / AS / NZS
KOD CODE D
mm INCH
D
mm
KOD CODE
DN
mm 20
25 32 40 50 63 75 90 110
1/2'' 3/4'' 1'' 1 1/4'' 1 1/2'' 2'' 2 1/2''
3'' 4''
21,3 26,9 33,7 42,4 48,3 60,3 75,3 88,9
114,3 AVPVCAP-110 AVPVCAP-040
AVPVCAP-090 AVPVCAP-075 AVPVCAP-063 AVPVCAP-050 AVPVCAP-020 AVPVCAP-025 AVPVCAP-032
15 20 25 32 40 50 65 80 100 ÇİFT ETKİLİ
DOUBLE ACTING
PNÖMATİK AKTÜATÖRLÜ EDE TİPİ YAPIŞTIRMA KÜRESEL VANALARI (U-PVC) 10 BAR ACID
ASİT
PNEUMATIC ACTUATION EDE TYPE BALL VALVES (U-PVC) 10 BAR
U-P.V.C. Küresel Asit Vanası U-P.V.C. Acid Ball Valve Yapıştırma / Solvent Basınç / Pressure : PN 10 Küre Contası / Seals : TEFLON O-Ringler / O-Rings : EPDM
*
*
* Redüksiyonlu / Reduction VPVCAP-113 VPVCAP-043
VPVCAP-093 VPVCAP-078 VPVCAP-066 VPVCAP-053 VPVCAP-023 VPVCAP-028 VPVCAP-035
METRİK - METRIC TSE / ISO / DIN
IMPERIAL
BS / ANSI / ASTM / AS / NZS
KOD CODE D
mm INCH
D
mm
KOD CODE
DN
mm 20
25 32 40 50 63 75 90 110
1/2'' 3/4'' 1'' 1 1/4'' 1 1/2'' 2'' 2 1/2''
3'' 4''
21,3 26,9 33,7 42,4 48,3 60,3 75,3 88,9
114,3 AVPVCAP-113 AVPVCAP-043
AVPVCAP-093 AVPVCAP-078 AVPVCAP-066 AVPVCAP-053 AVPVCAP-023 AVPVCAP-028 AVPVCAP-035
15 20 25 32 40 50 65 80 100 TEK ETKİLİ
SINGLE ACTING
U-P.V.C. Küresel Asit Vanası U-P.V.C. Acid Ball Valve Dişli / Female Thread Basınç / Pressure : PN 10 Küre Contası / Seals : TEFLON O-Ringler / O-Rings : EPDM
* *
VPVCAP-111 VPVCAP-041
VPVCAP-091 VPVCAP-076 VPVCAP-064 VPVCAP-051 VPVCAP-021 VPVCAP-026 VPVCAP-033 METRİK - METRIC
TSE / ISO / DIN
IMPERIAL
BS / ANSI / ASTM / AS / NZS KOD
CODE
D
mm INCH
D
mm
KOD CODE
D
INCH
20 25 32 40 50 63 75 90 110
1/2'' 3/4'' 1'' 1 1/4'' 1 1/2'' 2'' 2 1/2''
3'' 4''
21,3 26,9 33,7 42,4 48,3 60,3 75,3 88,9
114,3 AVPVCAP-111 AVPVCAP-041
AVPVCAP-091 AVPVCAP-076 AVPVCAP-064 AVPVCAP-051 AVPVCAP-021 AVPVCAP-026 AVPVCAP-033
DN
mm
15 20 25 32 40 50 65 80 100 1/2''
3/4'' 1'' 1 1/4'' 1 1/2'' 2'' 2 1/2''
3''
4'' VPVCAP-112 VPVCAP-042
VPVCAP-092 VPVCAP-077 VPVCAP-065 VPVCAP-052 VPVCAP-022 VPVCAP-027 VPVCAP-034
KOD CODE BSP - NPT
İKİ TARAFI DİŞLİ DOUBLE SIDE THREADED BİR TARAFI DİŞLİ - ONE SIDE THREADED
ÇİFT ETKİLİ - DOUBLE ACTING
* Redüksiyonlu / Reduction
* *
VPVCAP-114 VPVCAP-044
VPVCAP-094 VPVCAP-079 VPVCAP-067 VPVCAP-054 VPVCAP-024 VPVCAP-029 VPVCAP-036 METRİK - METRIC
TSE / ISO / DIN
IMPERIAL
BS / ANSI / ASTM / AS / NZS KOD
CODE
D
mm INCH
D
mm
KOD CODE
D
INCH
20 25 32 40 50 63 75 90 110
1/2'' 3/4'' 1'' 1 1/4'' 1 1/2'' 2'' 2 1/2''
3'' 4''
21,3 26,9 33,7 42,4 48,3 60,3 75,3 88,9
114,3 AVPVCAP-114 AVPVCAP-044
AVPVCAP-094 AVPVCAP-079 AVPVCAP-067 AVPVCAP-054 AVPVCAP-024 AVPVCAP-029 AVPVCAP-036
DN
mm
15 20 25 32 40 50 65 80 100 1/2''
3/4'' 1'' 1 1/4'' 1 1/2'' 2'' 2 1/2''
3''
4'' VPVCAP-115 VPVCAP-045
VPVCAP-095 VPVCAP-080 VPVCAP-068 VPVCAP-055 VPVCAP-025 VPVCAP-030 VPVCAP-037
KOD CODE BSP - NPT
İKİ TARAFI DİŞLİ DOUBLE SIDE THREADED BİR TARAFI DİŞLİ - ONE SIDE THREADED
TEK ETKİLİ - SINGLE ACTING
* Redüksiyonlu / Reduction